Cannot activate
WHEN I TRY TO USE THIS VERSION, IT STATES I HAVE ONLY THE FREE VERSION, AND WHEN I TRY TO USE THE PRO VERSION THE WEBSITE WANTS ME TO PAY FOR IT AGAIN,BUT SAYS IT IS REGISTERED ALL OK
FOR EXAMPLE WHEN I TRY TO DEFRAG, IT ONLY DEFRAGS, I CAN NO LONGER DEFRAG AND OPTIMSE MY DISCS AS BEFORE
THIS IS REALLY FRUSTRATING AS I HAVE BEEN A LONG TIME SUBSCRIBER
PLEASE HELP.
Not able to install an upgrade for Boostspeed 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
проблема с регистрацией
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
ID: 05
Name: Reallocated sector count
Value: 134
Worst: 134
Threshold: 140
Raw Data: 522
Status: Prefail
What does this mean and how do I fix it?
Lizenz
Delete wrong user
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
Windows refusing access as administrator
ユーザー制御
デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。
Could not activated my license
Program not registered
Thank you
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
LICENCE N°:
THANK YOU
Aktivation not Possibel
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Hirosuke Kajiyama
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
License key ライセンスキー:
Auslogics BoostSpeed 12
Pro version ?
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
I cannot reinstall ScanSnap software
I have had a Fujitsu S1500 ScanSnap scanner on my computer since I got it. Something happened lately (probably a refresh of Win10) and the program, ScanSnap Manager, stopped opening automatically when I turned on the scanner (connected by USB). After trying every remedy I could think of, I uninstalled the ScanSnap software, and cleaned the registry, figuring that I would reinstall the software from the original disk.
But even though I've done everything I know how to do to wipe the computer free of any traces of the original program, as you can see from the attached screen shot, the installer is not letting me install the program as it thinks there's a version already on the computer. There's nothing in installed programs, nor the registry, related to this program. And I force uninstalled it too. At this point I'm unable to use my scanner. Help!
Note that the subcategory of this question is not "Get Help" but your UI won't let me submit a question without choosing something, and the program in question is not in the dropdown list becuase it's already been uninstalled.
driver updater
when i run driver updater i lose keyboard capability on my ms surface.
I had to undo the updates to regain use of my keyboard.
ATOK ジャストシステム契約管理エージェント「管理のサービス」が停止になってしまう
どのように対処すればよいか。
Не работает микрофон
Добрый день.
После очистки и оптимизации компьютера с помощью Auslogics BoostSpeed перестал работать микрофон - и встроенный, и в любых наушниках. Система его видит, во всех настройках разрешено его использование, но на звук никак не реагирует.
На всякий случай прикладываю скрин менеджера программы - в заблокированных файлах есть куча файлов, связанных с драйвером звуковой карты Conexant, после исключения их из списка блокировки все равно не работает. Все это время звук в наушниках и без них есть.
Bought a TP link Bleutooth usb
Dear Support,
I have bought a TP link UB400 USB and inserted it in the USB port immediatly i had connection.
Then i update the drivers for windows from your package i bought two or 3 days ago and it updated the driver to Bleusolell drivers.
fter nothing seems to work anymore on bluetooth aspects.
Also the CSR software downloaded give me u huge pain because i could almost not removed it anymore.
I need the old driver from windows apperently that is not bluesoleil as this is not responding.
The Bleutooth usnb device i can see in the list of devices but will not react.
Thank you fore th help as suh.
regards Rob.
Malware
Does Auslogics Boostspeed 12 detect and remove Malware? Or do I need to purchase Auslogics Malware software?
Перестал работать микрофон после использования программы
Здравствуйте, после использования программы перестал рабоать микрофон, приложения его не видят. В настройках микрофона он включен, но когда нажимаю прослушать с утройства, там тишина. браузер тоже его не видит, дискорд предлагает поменять устройтво, но толку от этого тоже нет. Драйвера уже удалял и ставил заново, проблемы не решило
keyboard is working intermittently
I did some tweaks using Aulogics BoostSpeed 11. My keyboard is now working intermittently, but I'm not sure what tweak may have caused that. I will be typing and it will just stop recording my keystrokes for a few seconds, so I have to wait for a few seconds until the keyboard starts responding again. I have a new HP Envy laptop. Any suggestions? Thanks a lot.
p.s.: on the dropdown above for device, it gave me four options. I just selected what I think is the right one
アプリが 使ってると壊れる
更新していくとなのかは わかりませんが
アプリが壊れていきます
なにが原因かわかりません
前のパソコンでも同じような症状があり
それがやで 買い換えました
買い換えたばかりなのですが
またアプリが壊れていくという現象が起きています
仕方ないので Windows入れなおしました
my internal speakers are not working anymore
Hi, After purchasing and downloading auslogics boostspeed, driver update, defragmenter and anti-malware, my windows 10 laptops interal speakers are no longer working or even being detected by my computer. I have no idea how to fix this to get them re-enabled. Please help!!
Shut and Restart
Hard Disk usage 100 percent
Why The Hard Disk of windows sometime use at 100 percent and really slow down computer ?
Ne liste pas les points d'accès !
Bonjour,
Sûrement dû a une optimisation, je ne vois plus la liste des réseau WiFi !
Quel service et comment le redémarrer et le laisser actif, le remettre par défaut svp ?
Computer Freeze on Restart and Shutdown
Hello,
Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.
Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.
The only way I can shut down my computer when all of the above happens is holding the power button down.
Eli
Auslogic BoostSpeed 11
Buongiorno, recentemente nonostante l'aggiornamento, quando effettuo la scansione sulla modalità Protezione la ricerca si blocca.
Per la precisione, il programma riesce ad analizzare le trcce sul browser e nei file di sistema, ma non nelle applicazioni bloccandosi dopo avere analizzato il 32%. Ho provato a disinstallare il programma e reinstallarlo con la versione aggiornata senza risultato.
Grazie per l'eventuale aiuto.
Buona giornata
Stefano Carovani
SLOW NETWORK PERFORMANCE
BROWSER, eDGE, eXPLORER 11, CHROME ARE FREEZING AND ARE OPERATING SLOWER. i KNOW THAT TOOLS HAVE A WAY OF IMPROVING PERFORMANCE BUT AFER OPTIMIZING IS WHEN IT STARTED. i DONOT KNOW THE BEST MAUAL SPECIFICATIOS.
wHAT IS THE BEST WAY TO FIX THIS?
System Reserved Partition
一部のアプリやedgeのお気に入りメニューが勝手に消えていることについて
ワンクリックスキャナーを複数回にわたって要求された際、勝手に一部のアプリやedgeのお気に入りメニューが消えている。