Server use
It seems to run perfectly according our testings on our spare server, but can it be considered as a suitable program?
We have searched internet and we did not find any registry cleaner, especially designed for servers.
Best Regards
Angelos Diakoumakos
upgraging lost my registered status
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
hard drive chattering all the time win 10 pro ?????
boostspeed tray icon
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Power options gone
I entered a code to CMD and all my power plans resetted.The ones which auslogics set also gone the preset power plans.And when I set balanced again I have also have no slider on the battery icon to change it to left to battery save or right to better performance.
Now I have left with no power plans of auslogics and ultimate is gone too.Can I get them back or how ?
Can I get back my old battery icon slider when in balanced mode ?
Can I fix the closing the lid action and make laptop sleep when i close it ?
HDD 100% in Task Manager
У меня проблема с работоспособностью компьютера.
Загруженность диска 100% в диспетчере задач.
Обновлял драйвера черед Ваш Driver Updater, после чего компьютер стал дольше выполнять задачи.
Выполнил восстановление.
Запустил BoostSpeed13.
Вроде бы получилось настроить, и когда компьютер простаивает, то значения не поднимаются до 100%.
Но тем не менее, значения принимают, при выполнении задач.
Ищу решение по этому вопросу.
С уважением,
Максим
frequent log offs
DSN resolution failing
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
transfert photos depuis icloud
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
Не работает веб-камера
AUTOMATION ERROR THE OBJECT INVOKED HAS DISCONNECTED FROM ITS CLIENTS RUN-TIME ERROR
Fonction "rechercher dans" en haut à droite des fenêtres windows 10
Критическая
Fortnite
Boostspeed Benachrichtigungsanzeigen
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
Driver Updater
mcafee popouts stupid
re windows 10 not updating from 1909 to 22H2.
I have gone through all the suggestions. Update assistant ,Media creation tool,Update troubleshooter , resetting windows update components and still get the error: initiation failed during First-Boot phase at Migrate-Data.
USB bootable disk also did not succeed. I have disabled all periferals , ran fksdsk, restore health, checked that all drivers are up to date etc.. and still get the same error.
Error messages from windows logs : Error Essent 455 Loggin/Recovery. Error Security center 17 None. Error Application error 1000 Application crashing Events. Error Security-SPP 16385 None. These occur multiple times in the log file.
I also disabled Firewall and anti virus software, all to no avail.
Any idea what else I might try ?
installation logiciel
Saved on PC Email
MFT failure
AUSOLOGICS 12 UPDATE NOTIFCATION
Dear Support, I have Auslogics Boostspeed 12 on my machine. There was a flash on the screen of 12.2.0.0 a recommended update.
So my question is there was nothing in that flash update telling me if its a to pay for update or for free. This need to be shown in my book. Do you see where I am coming from with this? It shows what the big fixes are with the new update but yet nothing about if you hit the link if there is a small payment involved. This needs to be incorporated as part of any firmware update in my book. Regards Paul
Неверная функция
Как устранить неисправность
Операционная система не загружается. После включения компьютера загрузка операционной системы прекращается, колёсико всё время крутится и крутится. Такое положение может продолжаться и 1 час, и 2 часа и 4 часа. Больше не пробовал. Иногра, но очень редко, после неоднократного включения-выключения компьютера он вдруг после включения через 11-13 секунд, загружает операционную сисчтему, как это происходило после его покупки в магазине,
Вопрос:. В чём заключается неисправность и как эту неисправность устранить?
Отображение web страниц
Подозреваю, что это связано с дополнением, показывающим боковые вертикальные вкладки vtabs
https://chrome.google.com/webstore/detail/vtabs/okpnlgbgcfchbicbhjmmhldhkbkfilce?hl=ru
Можно ли исправить это неудобство?
Удалять дополнение не хочется - оно удобное.
Спасибо.
One Click Scanner
The former version of BootSpeed -one click Scanner was running much faster that the new one (version 11).
Is that logical ?
(forget the hereabove Subcategory)
Necesito una solucion
puede que halla activado algo por accidente de este programa y ahora ya no puedo cambiar el brillo de la pantalla no encuentro ninguna configuracion, tampoco es un problema de controlador grafico ya lo actualize.
Ayudenme a solucionarlo
Transferring Speed Boost, Defrag and Registry Cleaner to new computer
Need to do a clean reinstall of the operating system. Do I need to uninstall products before doing this.
No Disk DeFrag menu option in Auslogics 10
I installed this today, paid $30.00 dollars for it (after using a free verison for years), and after one attemot at optimizing my SSD on my Acer Laptop, the prgram restarted after completion and when it did it no longer has the menu option to actually defrag anything. the only menus i have are "reports" "Portable version" "ask a question" and "auslogics store".
what's going on?
thanks,
Brian
Boostspeed Background Optimization
I have been using boostspeed for almost an year now and I am a free user. It is all good but my only question is that should i let boostpeed run in backgroung and windows startup? Does Boostspeed optimize my pc in the backgroung when I enable this option? These processes take up a lot of memory. And also does boostspeed perfomance monitor optimize the pc in backgroung ?
Regards,
Rishi
Audio artifact
Periodic loss of sound for 1 second in the processor power supply mode "balanced," "high performance." In the "energy saving" mode, this is not! Is it possible to solve this problem? The drivers are fresh, so is Windows.
Respect, Yuri.
display scaling
I play cs go, and I would like to know how to optimize the pc for this game, + I want to minimize impuct lag
the mouse often floats and the screen is blurry
Bluetooth device
BoostSpeed 12 deleting my Spotify playlist files
EWhy does every time i run the BoostSpeed 12 scan it deletes all of my Spotify downloaded playlist files?
logiciel
à l'ouverture de l'application un message d'erreur : 0x0000007E
j'ai supprimé 1 fois le logiciel
j'ai enregistré une nouvelle fois et à l'ouverture,jèai le méme message d'erreur