1897 questions
Driver is Unavailable
My Win 10 (64bit) PC can find my Epson printer on my local network, connected by ethernet cable to my router, and installs the "necessary files". However, afterward in my settings it shows the printer with "Driver is Unavailable" and nothing will print. Both my wife's PC and all of our iPhones/iPads have no issues printing so I know it is connected properly and functional. The only device having an issue is my PC. I have removed the printer and reinstalled it multiple times with the same result. I have also downloaded and installed the newest drivers available from Epson for this printer but somehow my computer does not seem to be able to find or recognize them. A support request has been sent to Epson but so far any suggestions from their automated response system have not be successful.
G-HUB
Since I updated the USB driver my G-HUB with logitech dosn't recognice my keyboard or mouse. What shall I do?
Actualizaciónes
¿Siempre es mejor actualizar todo el software (windows, sistema operativo, apps, drivers, etc.) a la versión más reciente que se vaya publicando? o cuando todo está funcionando en forma correcta ¿es mejor detener las actualizaciones para dejar todo como está y que se mantenga todo funcionando en forma adecuada?
Bricked my HP Evo Prod ID 669a1ua after driver update
So I'm old-school (DOS Win 3.11) computer-savvy...but not much more (never heard of secure boot/TPM/Bitlocker - until I used your program to update a bunch of drivers (probabally the BIOS) and I got BSOD demanding Bitlocker key and after 3 days found no darn way around it. Finally went to HP Cloud recovery (supposed to resture factory config) but this tool does not work for me (gets stuck in a boot loop...internet search did not reveal fix/work-around that I haddn't tried; i.e at the BIOS I turned off Secure boot, allowed USB Boot, made that the first boot device...even tried re-directing the boot loader to the flash drive...but I digress).
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Windows Update
Error message: "Your device is missing important security and quality fixes.", tried several fixes...no result.
DRIVER UPDATER REFUSES TO CONNECT
Any idea as to why this is happening? I have registered the program in the WIN firewall, but no success. All other Auslogics software is working without a hitch.
Thanks for your help!
James
Thanks for your help!
James
heute kein Zugang zum Abruf der Treiber-Daten
Gibt es ein technisches Problem beim Zugang zum Datenserver?
Mots de passe
Bonjour,
BootSpeed a chaque analyse du système, il me supprime les mot de passe et a chaque fois je suis obligé de resaisir ce dernier.
Comment effectuer de facon que BS ne supprime plus les mots de passe ?
Cordialement
Denis Schmitt
BootSpeed a chaque analyse du système, il me supprime les mot de passe et a chaque fois je suis obligé de resaisir ce dernier.
Comment effectuer de facon que BS ne supprime plus les mots de passe ?
Cordialement
Denis Schmitt
Anti-virus
Bonjour !!
J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.
Dois-je craindre la même chose avec CCLEANER ?
Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...
Cordialement,
Eric
J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.
Dois-je craindre la même chose avec CCLEANER ?
Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...
Cordialement,
Eric
Velocidad de la computadora
¿Qué puedo hacer para que mi computadora siempre funcione lo más rápido posible?
Fehlermeldung
Hallo,
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Problème fonctionnement Bluetooth
Bonjour, suite à une mise à jour de Windows (?), mon clavier Bluetooth n'est plus reconnu. Dans "paramètres", il est indiqué : installation bloquée par stratégie de groupe.
Que dois-je faire pour réutiliser mon clacier normalement ?
Merci par avance
Cordialement
Que dois-je faire pour réutiliser mon clacier normalement ?
Merci par avance
Cordialement
reparer windows 10
MON WINDOWS 10 NE FONCTIONNE PAS BIEN PAR DE BARRE DES TACHES NI L EXPLORATEUR DE WINDOWS
Fences Requires Reentry of Product Code Everytime BoostSpeed Runs
Hi,
I have had Fences for many years. When BoostSpeed runs its weekly maintenance, I must re-enter the Fences Product Key to re-register the product. I do this and Fences works fine again.
This problem occurred several years ago and you provided a fix where BoostSpeed does not delete/address a file required for Fences related to the product key.
Would you please re-send those instructions if that would resolve the issue or advise other solutions to resolve?
Thank you,
Rich Sullivan
I have had Fences for many years. When BoostSpeed runs its weekly maintenance, I must re-enter the Fences Product Key to re-register the product. I do this and Fences works fine again.
This problem occurred several years ago and you provided a fix where BoostSpeed does not delete/address a file required for Fences related to the product key.
Would you please re-send those instructions if that would resolve the issue or advise other solutions to resolve?
Thank you,
Rich Sullivan
Cross mark on wifi symbol
This happens sometimes . When i on the laptop there is a red cross mark on wifi button and when i on the wifi it doesnot detect any network . But after I off and on the aeroplane mode and the system a lot of times it goes off . It is not related to the function key which disables it as i tried it .
Ma webcam ne fonctionne plus
Bonjour,
Suite à des modifications de BootSpeed, la webcam de mon ASUS VivoBook Pro 17 N705FD ne fonctionne plus.
Elle a commencé à se mettre en 4/6, puis elle est maintenant déconnectée !
J'ai désinstallé le programme et coché l'option "restaurer les changements éffectués", mais cela n'a pas résolu le problème.
Best regards,
loupherv
Suite à des modifications de BootSpeed, la webcam de mon ASUS VivoBook Pro 17 N705FD ne fonctionne plus.
Elle a commencé à se mettre en 4/6, puis elle est maintenant déconnectée !
J'ai désinstallé le programme et coché l'option "restaurer les changements éffectués", mais cela n'a pas résolu le problème.
Best regards,
loupherv
Upgrade to BoostSpeed 11
I paid for this software before it went to version 11. Now that it updated to 11 I have to purchase it again?
Sound Fades In and Out
With hte update of Windows t0 the sound on my computer fades in and out. I have used the troubleshooter; however, it is of no help at all.
I have a HP Pavilion 15t-n200 CTO Notebook PC and HP is of no use any longer as my warranty has run out and as my computer is almost seven years old it probably cannot be renewed. My laptop has a Conexant Audio driver HD,
I am considering buying a new computer but before spending $1000, I want to be sure there isns't something I can do with the one I have.
I have a HP Pavilion 15t-n200 CTO Notebook PC and HP is of no use any longer as my warranty has run out and as my computer is almost seven years old it probably cannot be renewed. My laptop has a Conexant Audio driver HD,
I am considering buying a new computer but before spending $1000, I want to be sure there isns't something I can do with the one I have.
DNS server
Hi! Thanks for the help! I would like to change my local DNS server to a faster one! I have used Namebench to scan for one but the Auslogics app blocks my upgrade. Can I tempoarily disable Auslogics to change the server or must I uninstall the app then reinstall it after I get a new DNS server? I always do a network scan to set the perameters which does help but it help to get a better DNS! What can I do? Thank You, Craig Stone Jackson Ca.
Intermittent PC Crashes/Freezes
To Whom It May Concern,
I intiated my original correspondence on the 5th November as indicated below:
I, now, upload the Event View Log, in the hope this will assist you in resolving this issue. Many thanks. As an aside, I think there should, also, be an option to 'Add File' from my account page. Instead, I am obligated to intiate another question to include this file and this should not be the case, when it is part of the same, initial, question.
This is a bit ridiculous. I am asked to create a log from the Event Viewer which is 'saved as' a .evtx file and now I cannot add it! Neither can I add it in a format that is recognised by Auslogics! Wow! Really, really helpful - Not!
I await an update at your earliest available opportunity.
Kind regards,
Ian
Ian R. W
Dear Ian,
Thank you for posting your question on our forum.
The easiest way to solve the issue is to uninstall the program that creates this error or contact their support.
Often, such errors are created by hacked software or bugs in software that can only be solved by their developers.
Running the command "sfc / scannow" in CMD under the admin might help with the issue.
You can also send to our support logs with system information and event viewer so that we can better understand the issue.
To get the system information report press Start -> Run, type in MSINFO32 and press the Enter button. Save the report using the File -> Save menu option.
To get logs from event viewer, please do the following:
1. Press the key combination "Windows" + "X"
2. Select "Event Viewer"
3. Expand the "Custom Viewer" subsection
4. Select "Administrative Events"
5. Expand the "Action" menu
6. Click on "Save all events in custom view as ..."
7. Save log to PC
If you need any further assistance or have any other questions, please do not hesitate to contact us.
Upvote (0)
Ian W
Edited 7 days ago
Waiting for moderation
Dear Suzanna,
Your prompt response to my request for technical support is very much appreciated.
Further to your recommendations I have now run the commend "sfc /SCANNOW in CMD under the Administrator privileges.In the event, corrupted files were found and successfully repaired.
At this stage, I think I will see if this provides system stability, before sending the associated report with the Windows Event Viewer.
I remain grateful for your attention, time, effort and co-operation in this assisting me to resolve this issue.
Kind regards
Ian
Ian R. W
[/private]
Dear Suzanna,
Further to my correspondence sent to you on the 5th November, I have continued to receive intermittent crashes/freezing on my PC, so as recommended, I attach the associated Event View Log, in the hope this data will be able to assist you in resolving my issue.
Kind regards,
Ian
Ian R. W
I intiated my original correspondence on the 5th November as indicated below:
I, now, upload the Event View Log, in the hope this will assist you in resolving this issue. Many thanks. As an aside, I think there should, also, be an option to 'Add File' from my account page. Instead, I am obligated to intiate another question to include this file and this should not be the case, when it is part of the same, initial, question.
This is a bit ridiculous. I am asked to create a log from the Event Viewer which is 'saved as' a .evtx file and now I cannot add it! Neither can I add it in a format that is recognised by Auslogics! Wow! Really, really helpful - Not!
I await an update at your earliest available opportunity.
Kind regards,
Ian
Ian R. W
Dear Ian,
Thank you for posting your question on our forum.
The easiest way to solve the issue is to uninstall the program that creates this error or contact their support.
Often, such errors are created by hacked software or bugs in software that can only be solved by their developers.
Running the command "sfc / scannow" in CMD under the admin might help with the issue.
You can also send to our support logs with system information and event viewer so that we can better understand the issue.
To get the system information report press Start -> Run, type in MSINFO32 and press the Enter button. Save the report using the File -> Save menu option.
To get logs from event viewer, please do the following:
1. Press the key combination "Windows" + "X"
2. Select "Event Viewer"
3. Expand the "Custom Viewer" subsection
4. Select "Administrative Events"
5. Expand the "Action" menu
6. Click on "Save all events in custom view as ..."
7. Save log to PC
If you need any further assistance or have any other questions, please do not hesitate to contact us.
Upvote (0)
Ian W
Edited 7 days ago
Waiting for moderation
Dear Suzanna,
Your prompt response to my request for technical support is very much appreciated.
Further to your recommendations I have now run the commend "sfc /SCANNOW in CMD under the Administrator privileges.In the event, corrupted files were found and successfully repaired.
At this stage, I think I will see if this provides system stability, before sending the associated report with the Windows Event Viewer.
I remain grateful for your attention, time, effort and co-operation in this assisting me to resolve this issue.
Kind regards
Ian
Ian R. W
[/private]
Dear Suzanna,
Further to my correspondence sent to you on the 5th November, I have continued to receive intermittent crashes/freezing on my PC, so as recommended, I attach the associated Event View Log, in the hope this data will be able to assist you in resolving my issue.
Kind regards,
Ian
Ian R. W
Very long time to load the computer! HElp!
can you help me please, I have a laptop that takes a long time to load please help me
Eliminar una partición creada por Windows
Mi laptop HP tiene una memoria de 120GB. De los cuales hay una partición llamada HP_RECOVERY (G) que ocupa 21GB.
Cuando adquirí la laptop traía el Windows 7, ahora tiene el Windows 10.
Todo el disco duro lo uso para instalar software, no hay archivos de ningún tipo almacenados excepto los del sistema y de las aplicaciones que tengo instaladas.
Todos los datos de otro tipo (básicamente imagenes),los manejo a través de discos duros externos.
Deseo eliminar la partición (G) con el fin de abrir más espacio en el disco duro de la laptop, ¿Es posible?
Cuando adquirí la laptop traía el Windows 7, ahora tiene el Windows 10.
Todo el disco duro lo uso para instalar software, no hay archivos de ningún tipo almacenados excepto los del sistema y de las aplicaciones que tengo instaladas.
Todos los datos de otro tipo (básicamente imagenes),los manejo a través de discos duros externos.
Deseo eliminar la partición (G) con el fin de abrir más espacio en el disco duro de la laptop, ¿Es posible?
Outlook 2013
I cannot no longer open a browser in Outlook 2013 after using your registry cleaner. Let's not play games like we have been doing since July 2020. Support is a JOKE!!!
BoostSpeed 11
Приветствую уважаемые! Во-первых:после оптимизации жёсткого диска"С" SSD c ОС , диск перестал открываться в предварительной программе запуска(BIOC) Windows 10 pro версии 1903, прекидывал диски местами результатов нет " Мёртвый" подскажите как его реанимироваь??? Пришлось записывать ОС на обычный жесткий диск. В цело мне ваша программа нонравилась - поддержка обяного жесткого диска значительно лучше чем другие...
pendrive got corrupted when i applied free up space to it by auslogics boostspeed
two days ago i have performed an action named "free space wiper" to my pendrive because i wanted to format my pendrive but befor i proceed to this action i proceed to free space wiper and i have applied to my pendrive , i don't no why but the operation stoped automatically on 33% , then i have tried to restart that operation but my pendrive was not listed on removable devices, then i have eject and remounted but still my pendrive was not listed on removable devices , then i mounted my pendrive to another system luckily that system identified my pendrive but when i tried to perform format operation to my pendrive , that shows me an error that" this disk is write protected" and after that "windows can't format removable drive:H" .....
and that's how my pendrive got corrupted by performing an operation "free space wiper"
Start Up
AOL Software Problem:
I have AOL Desktop Gold & it worked good for a few years, then when I signed in, the orange ball appeared, and after that, nothing; AOL trtied to fix it, via reinstall but couldn't. Any suggestions?
I have aused Hewlette Packard Desktop PC, was Windows XP Now Windows 7. Petium 4 processor, 2GB Memory
I have AOL Desktop Gold & it worked good for a few years, then when I signed in, the orange ball appeared, and after that, nothing; AOL trtied to fix it, via reinstall but couldn't. Any suggestions?
I have aused Hewlette Packard Desktop PC, was Windows XP Now Windows 7. Petium 4 processor, 2GB Memory
Skipped traces
Lanovo with windows 10
Just upgraded to latest BoostSpeed 11 and have a problem I NEVER had with the precious version ~ 245 traces in the broswer SKIPPED! Made repeated attempts, alwys 245 skipped! Not good!-
PS, forcing a "Subcatagory" selrection makes ZERO sense. the categoriars are inane!
Error 15
How to fix "Access Denied Error 15 This request was blocked by the security rules" in Windows 10 Pro with Edge browser?
The date and time information for this PC is correct.
I am not using any Proxy or VPN for my internet connections.
I am NOT able to access this website with Windows 10 Pro PC using the Google Chrome browser
I am able to access this website with another Windows 10 Pro PC using the Google Chrome or the Edge browser
The date and time information for this PC is correct.
I am not using any Proxy or VPN for my internet connections.
I am NOT able to access this website with Windows 10 Pro PC using the Google Chrome browser
I am able to access this website with another Windows 10 Pro PC using the Google Chrome or the Edge browser
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7