У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.
Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.
Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.
The only way I can shut down my computer when all of the above happens is holding the power button down.
Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).
I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."
So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.
I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Can you help?
It is ruining my use of Auslogic to keep my computer clean and optimized. This 'trojan' apparently slows all the performance and my web browsers! Do you all have a fix. I had reinstalled once and still had the problem. Now, my auslogic is not doing its job in cleaning 'junk' from my drive! Got any solution?! The file was deleted by Kaspersky!
Hello, and Merry Christmas. My gmail in windows10 will receive mail, but will no longer send. I've tried deleting and re-installing trhe account several times. Any ideas? I have no problem using the Gmail website, but I like the Windows10 default mail.
I wish you rain, and lots of rain!
My desktop PC can no longer receive Windows 10 updates.
Below is the error message that has come up over and over again, for the past 2 months:
2020-06 Cumulative Update for Windows 10 Version 1909 for x64-based Systems (KB4560960)
Status: Download error - 0x800700c1
Currently, I have Windows 10 Home (64-bit) v. 1909, build. 18363.720.
I also have another computer (a laptop) with Windows 10 Home (64-bit) and all the Windows 10 updates have worked fine, including the latest "May v.2004" update.
Can you help me with my desktop computer? I'd like to be able to continue installing new Windows updates on it.
Myron Achtman (Canada)
Buongiorno, recentemente nonostante l'aggiornamento, quando effettuo la scansione sulla modalità Protezione la ricerca si blocca.
Per la precisione, il programma riesce ad analizzare le trcce sul browser e nei file di sistema, ma non nelle applicazioni bloccandosi dopo avere analizzato il 32%. Ho provato a disinstallare il programma e reinstallarlo con la versione aggiornata senza risultato.
Grazie per l'eventuale aiuto.
desideravo un Vs. consiglio:
sono già in possesso di Auslogics Disk Defrag 9.
Per migliorare in generale le prestazioni del mio computer sono indeciso se acquistare:
A) Driver Updater
B) BoostSpeed 11
domanda: BoostSpeed 11 include già anche Driver Updater ?
... non vorrei acquistare programmi uguali ...
Cosa mi consigliate di acquistare? Driver Updater oppure BoostSpeed 11 ?
Grazie e un cordiale saluto.
hello there, im facing a problem with installing discord, says something about checking the setup logs or something to contact author. i watched your video on how to fix that problem and tried both methods but they dont work. Is there anyway i can get help? Thank you. Btw i just put access because there was no discord subcategory, the problem isnt with access its with discord.
Hello Support. On 02/13/20 I purchased an iBUYPOWER gaming desktop from BestBuy:
•model BB971 which includes the TUF B365M-PLUS Gaming ASUS motherboard, Intel 15-9400F, 6-Core 2.9GHz (4.1 GHz Turbo) NVIDIA GeForce GTX 1660 6GB. It has a 240GB solid state drive & 1TB SATA III hard drive. And includes Windows 10 home edition. (see CPUID report attached for further description)
However it continues to freeze up at various times throughout the day for typically about 4 seconds. So I tried a number of repairs after researching this problem on the internet; where I saw that many other people have had this same issue. None of those repairs have worked so far. Notably, I have NOT revised the BIOS as it appears to have the latest version: 1201 dated 07/15/19.
Do you have a solution for this? I love this desktop and have already loaded all my applications, so really don’t want to return it for a new one.
J'ai besoin d'utiliser internet Explorer pour activer un service (système d'authentification qui ne fonctionne qu'avec IE)
Or je ne trouve plus IE sur mon poste. Il n'apparait pas dans Panneau de configuration\Tous les Panneaux de configuration\Programmes et fonctionnalités\Activer ou désactiver des fonctionnalités windows
Je ne me souviens plus comment je n'ai dé"sisntallé, et je me demandais :
- si c'est un tweak de Bootspeed qui l'a désinstallé?
- comme faire pour le ré installer?
J'ai essayé de le re téléchargé en online et en offline mais impossible de termienr l'installation. Soit un message me dit qu'une version plus récente est installée, (Edge), soit l'installation s'arrête sans message d'erreur.
PS : la sous-catégorie est obligatoire, mais Internet Explorer n'était pas listé, j'ai donc choisi une valeur approximative
Hello and thank you for your time,
I am having trouble with finding info relative to my specific situation. I own an Asus ROG Strix GL553VD with 16 GB ram and it came with the 1 TB HDD. Ive since upgraded it to a 500 GB SSD by WD Blue as of recetly Ive also added a 120 GB NVMe m.2 SSD and Id really like to be ablr to add my whole windows OS and boot from it to achieve faster results plus Ive heard its less stress on your main drive. I recently tried copying the windows folder to it (and all 26 or so GB that it held) onto the new SSD and that obv didnt work. I have AOMEI partition pro and back upper but my Windows OS isnt on its own partition on C drive and Im finding nothing about migrating just those files or how to create a partition of just those files and I see nothing about migrating from SSD to a different SSD. Thank you for your time and potential help!