1897 questions

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1265 views
Apr 12, 2021 at 02:40 PM

Screen Size

Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.

Chales Waltz

Content hidden to protect privacy

1013 views
Apr 11, 2021 at 03:29 AM

ERROR 80073712

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
1061 views
Apr 10, 2021 at 08:00 PM

System Booting

When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
944 views
Apr 10, 2021 at 05:05 AM

определение местоположения

Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.

836 views
Apr 09, 2021 at 04:28 PM

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо

1107 views
Apr 08, 2021 at 07:05 PM

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

1118 views
Apr 08, 2021 at 01:17 AM

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
1220 views
Apr 07, 2021 at 05:09 PM

activacion Pro

Por favor quiero actualizar mi version a Pro

997 views
Apr 03, 2021 at 10:27 AM

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
1229 views
Apr 02, 2021 at 06:15 PM

graphics card

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
1211 views
Apr 02, 2021 at 03:28 PM

Postgrest SQL_Службы Microsoft

Добрый день!

Вот тут два скрина.

Первый скрин это сама проблема

Второй скрин на что это влияет.
948 views
Apr 01, 2021 at 02:28 PM

Computer Freeze on Restart and Shutdown

Hello,

Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.

Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.

The only way I can shut down my computer when all of the above happens is holding the power button down.

Eli

1847 views
Mar 29, 2021 at 02:21 AM

windows 10 up grade

how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.

1145 views
Mar 28, 2021 at 11:08 AM

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

1067 views
Mar 27, 2021 at 09:53 PM

no sound, drivers not there

Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.

Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).

I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."

So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.

I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
1503 views
Mar 26, 2021 at 10:52 PM

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
1271 views
Mar 25, 2021 at 07:30 PM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1526 views
Mar 25, 2021 at 01:02 PM

No thumbnails

I have WIndows 10 that is up-to-date. It has suddenly stopped displaying thumbnails of pictures (jpeg). It seems that t his is a common problem. I have taken several recommended procedures (from https://www.windowscentral.com/how-reset-thumbnail-cache-windows-10) to overcome the problem without benefit.

Can you help?
1659 views
Mar 24, 2021 at 05:13 PM

Глубокая очистка файлов

Здравствуйте! После выполнения глубокой очистки файлов перестало работать стандартное приложение Windows "Кино и ТВ". Исчез exe-файл - 0 байт. Прошу учесть при подготовке обновления BoostSpeed 12, а также подсказать - как востановить приложение "Кино и ТВ"?
С уважением,
Виктор Оплеснин

1026 views
Mar 23, 2021 at 07:21 AM

Shut and Restart

Can you try and establish just why I cannot shutdown or restart my desktop Windows 10 2004 64-Bit? I get a BSOD with error message of driver power state failure
1673 views
Jul 07, 2020 at 11:52 AM

Windows 11

Will Boostspeed be compatible with Windows 11?
1669 views
Jul 06, 2021 at 06:09 PM

アプリが 使ってると壊れる

更新していくとなのかは わかりませんが
アプリが壊れていきます

なにが原因かわかりません

前のパソコンでも同じような症状があり
それがやで 買い換えました

買い換えたばかりなのですが
またアプリが壊れていくという現象が起きています
仕方ないので Windows入れなおしました

1660 views
Mar 11, 2020 at 01:27 AM

No thumbnails

I have WIndows 10 that is up-to-date. It has suddenly stopped displaying thumbnails of pictures (jpeg). It seems that t his is a common problem. I have taken several recommended procedures (from https://www.windowscentral.com/how-reset-thumbnail-cache-windows-10) to overcome the problem without benefit.

Can you help?
1659 views
Mar 24, 2021 at 05:13 PM

programs as a threat

Dear Sir / Madam, I bought the programs Defrag, Register Cleaner and Bootspeed from Auslogics. With license. I am satisfied with the programs but Malwarebytes sees these programs as a threat. See picture. How can this and how can I solve this.

1656 views
Apr 13, 2020 at 07:07 AM

computer not turning on

my computer turning on and turning off

cpu fan not spnning but other fan are spinning

i cleaned the fan but also not spinning

I tried other cpu fan but also not spinning

cannot boot into the windows
1655 views
Jul 22, 2020 at 07:36 AM

Discord failed installation

hello there, im facing a problem with installing discord, says something about checking the setup logs or something to contact author. i watched your video on how to fix that problem and tried both methods but they dont work. Is there anyway i can get help? Thank you. Btw i just put access because there was no discord subcategory, the problem isnt with access its with discord.

1655 views
Aug 26, 2020 at 01:20 PM

Ne liste pas les points d'accès !

Bonjour,

Sûrement dû a une optimisation, je ne vois plus la liste des réseau WiFi !

Quel service et comment le redémarrer et le laisser actif, le remettre par défaut svp ?

1652 views
Apr 13, 2020 at 05:42 PM

not letting me login

"Something went wrong. Your account might not have been added."
1648 views
Apr 20, 2021 at 10:54 PM

System Reserved Partition

As far as I can tell I lost my SRP after a Windows 10 v20H2 update. How do I get it back or do I not need it? I went back to version 2004 and still can't find it.
1647 views
Sep 01, 2020 at 08:30 AM

El teclado salta atrás al escribir

When typing it is as if the keyboard were pressing only the tab, and other than that it sometimes only moved backwards. A few words back. That happens after having the computer turned on for a while, that is, it does not turn on that way. As time passes, it starts with that situation of going only words back when typing or leaving the current text box as if pressing tab.

1645 views
Jul 28, 2020 at 12:18 AM

Keyboard shift keys non-functioning, also upper case symbols (ie "@")

Hello,
After receiving the most recent Win 10 update and installing it, both shift keys have stopped working and I can't get upper case symbols.
I'm writing this on my old desktop, winxp. the Laptop in question is running Win10 having originally run on

Win7, then Win8 and now Win 10.
iVe tried rollback, updating drivers and restarting, deleting and reinstalling, checking Sticky Keys etc, also checking language layout.
I'm at my wit's end, can you help me please?
Regards,
Sue Youell

1644 views
Oct 22, 2019 at 02:31 PM

Malware

Does Auslogics Boostspeed 12 detect and remove Malware? Or do I need to purchase Auslogics Malware software?

1643 views
Jan 16, 2021 at 05:14 PM

64 bit operation

when will there be a 64 bit program? 32bit on new faster machines is slow

1640 views
Jun 03, 2020 at 11:19 AM

no windows updates

i have been trying to update to the windows march update but I can't

1639 views
Mar 25, 2020 at 03:40 AM

МОва пк

ЯК ВИПРАВИТИ ЦЕ НА ЗВИЧАЙНУ МОВУ
Åñëè ó âàñ óñòàíîâèëàñü íåêòèâèðîâàííàÿ âåðñèÿ äîáâüòå shfolder.dll â èñêëþ÷åíèÿ àíòèâèðóñà.
1635 views
May 07, 2020 at 09:26 AM

Slow

Why is my device running slowly??

1627 views
May 20, 2020 at 07:12 AM

отключение не нужного

как в этой программе можно ли отключить все не нужно и что бы пк летатал пк нужен исключительно для игр и хотелось бы отключить все не нужное ну я не знаю половины тут не чего если можно подскажите что делать

1626 views
Jul 14, 2020 at 03:44 PM

一部のアプリやedgeのお気に入りメニューが勝手に消えていることについて

ワンクリックスキャナーを複数回にわたって要求された際、勝手に一部のアプリやedgeのお気に入りメニューが消えている。

1625 views
Mar 18, 2020 at 05:10 PM

Duplicated Folder

Hello,

My name is Eric Borges and I am having an issue that when I update my windows 10 it's duplicating the windows folder in my C:, (follow attached). I've try to delete in many ways and even tho with the Auslogics app is not working, it's saying that the folder is deleted, but it's not. Is there any way to remove it permanently?

Best.
1623 views
Oct 27, 2020 at 07:40 PM