1897 questions
MICROSFT 11
The lap top I use is fairly new, but is running windoews 10 pro, Microsoft constantly urge me to load certain up dates and when I try the message is cannot comply you need to purchase windows 365 for instance, but I have a perfectly good windows office already loaded can I stop the 365 nonsense or must i spend and buy 365.
fail fast exception
when attempting to open Scanner, i receive the above message, but no information is given.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
software Auslogics
On the 24 th of november I purchased Auslogics essential tools. I had a pop up that i could receive Auslogics Bitreplica for free. I would get a code in my mail so i can register. never had the code. Can you send the code so that I can use the program?
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Olá! Após usar os produtos da Auslogics, Driver Updater e BootSpeed, não consigo conectar dispositivos via bluetooth. Há alguma configuração que possa resolver?
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
play game without lag
i am playing the game is heavy than 60gb so i have a question
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
Location
Since installing BoostSpeed and using the various tools, my computer Location function is no longer operable. In Settings, all options to switch location settings on are greyed out. I have follewed various YouTube suggestions to no avail. One Registry key the videos refer to I don't seem to have anymore, although I can't find it deleted in BoostSpeed bin. The key is:- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lfsvc\TriggerInfo
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
Производительность ПК
Ваша программа периодически выдает сообщение о перегруженности процессора моего ПК и отсылает к "подробностям". А подробности - это сканер всех работающих и неработающих программ в компьюторе. Ваш сканер при этом никоим образом не оценивает важность запущенного процесса для работы компьютера. По сопровождающим характеристикам определить возможность отключения того или иного процесса очень трудно. Тогда какой смысл ваших обещаний "оптимизировать работу компьютера", если инструментов, реально выполняющих эту фунцкцию в части отключения второстепенных процессов, вы не предлагаете?
pop up for ugrade when I already subscribe to boost 12
I upgraded to Boost12 quicte some time ago and yet I keep getting an annoying popup on my screen to upgrade. I need this to stop and this should not count as one of my questions because it is purely an issue on your end.
Laptop slow on startup
Hi there,
I have a new laptop with a high spec. However, for the first hour each day, it runs as slowly as an old 486 machine, then suddenly it catches up with itself and runs superbly all day.
I've checked everything:
Programs in the Start menu
ESET and OneDrive behaviour
Updates behaviour
BIOS settings
Everything I can think of and a hundred things I've learned about...
I've uninstalled some of the programs, but now I'm thinking I should uninstall everything and reinstall Windows 10.
Any ideas before I try the Windows 10 reinstall?
NOTES (1) I did try the upgrade to Windows 11 when I first got the machine, however, I didn't like it and went back to Windows 10; it was slow in the short time that I ran Windows 11 too, so I don't konw if that means something, like maybe it's a hardware issue? (2) It was a demo machine in the store where I bought it.
I have a new laptop with a high spec. However, for the first hour each day, it runs as slowly as an old 486 machine, then suddenly it catches up with itself and runs superbly all day.
I've checked everything:
Programs in the Start menu
ESET and OneDrive behaviour
Updates behaviour
BIOS settings
Everything I can think of and a hundred things I've learned about...
I've uninstalled some of the programs, but now I'm thinking I should uninstall everything and reinstall Windows 10.
Any ideas before I try the Windows 10 reinstall?
NOTES (1) I did try the upgrade to Windows 11 when I first got the machine, however, I didn't like it and went back to Windows 10; it was slow in the short time that I ran Windows 11 too, so I don't konw if that means something, like maybe it's a hardware issue? (2) It was a demo machine in the store where I bought it.
No Windows Update KB5008212
From a couple of months now, I am unable to install Windows Update "Windows 10 Version 21H1 for x64 Systems (KB5008212)". Windows Update is urging me to do so, but all I get is error (0x800f0831). I've tested all kind of solutions from Microsoft and other sources, and tried al least a dozen times, with no success. Some sources insists in the fact you need previous updates installed before this oner, and Bootspeed 12 clears update files as a part of Windows Slimmer tool. Is the first time I experience a problem like this and, even not critical, is worrying me because I can get a solution. Best regards.
Notifacations
Can we stop the nag notifacations?
I do not need constant reminders that I have 3 questions, now 2. Stop it.
I do not need constant reminders that I have 3 questions, now 2. Stop it.
Restricted volume on a new hard drive
I installed a 3 TB hard dive on my desktop. I can only use 2TB with Wndows 10. How can use all of the new hard drive?
How to prevent the software from deleting cookies of Bank and Credit cards
I have Banks and Credit Cards that I use regularly. I don't want to have problems of logon to them every time I use the Bootspeed to scan the system. The Bank that I hvae problems after the Bootspeed scan system Is Bank of American.com, Chase Bank logon. Visa logon, American Express .com Credit Card logon. Please help me to resolve these problem. Thank you,
Content hidden to protect privacy
Outlook not closing correctly
I have MS 365.
Brand new machine hi end
When I close Outlook it does close OK
But when I reopen in morning I always get message it did not close correctly "Something stopped it form closing" Do I want to restore to previuos". I click yes and it opens
Any ideas. It was reinstalled
Thanx
Brand new machine hi end
When I close Outlook it does close OK
But when I reopen in morning I always get message it did not close correctly "Something stopped it form closing" Do I want to restore to previuos". I click yes and it opens
Any ideas. It was reinstalled
Thanx
SSD optimization for a whole day
Hello
I am using SSD optimization with Auslogic Bootspeed 12 to optimize my C drive (114 GB free 54 gb) it took a whole day to finish. Is it normal for a ssd optimization running? (while it only took 5 mins to optimize my D drive 98GB free 54GB). How frequently should I run SSD optimization
I am using SSD optimization with Auslogic Bootspeed 12 to optimize my C drive (114 GB free 54 gb) it took a whole day to finish. Is it normal for a ssd optimization running? (while it only took 5 mins to optimize my D drive 98GB free 54GB). How frequently should I run SSD optimization
Uninstall
How do I uninstall your program(s) from my Windows 10 PC?
It's not in/on my programs list to uninstall.
Thank you
Ronald Cloud
It's not in/on my programs list to uninstall.
Thank you
Ronald Cloud
no responcive pc
after a couple of min from when i boot the pc up and it loads into window 10 the system. become un responsive and take for ever to open anything. there is no virus or malware that i can see or detected.
new computer
I have a new computer that is online now, the old slimline is gone. How do I move my current contract to cover my new computer.The order number is 3740428-4830463. Thank you
ファンクションが間違っています
Auslogics BoostSpeed 11 でクリーンアップ後（使っていないファイル／ホルダーを削除？）、PC立ち上げ時に以下のメッセージが出ます。
無視して進めれば、通常の動作をしているように見えます（今のところトラブルは起こりません）が、何が起こっているのでしょうか？
どうすれば、このメッセージを消すことが出来るのでしょうか？
C:\Program Files\WindowsApps\Microsoft.549981C3F5F10_3.2202.10603.0_x64_...\Win32Bridge.Server.exe
ファンクションが間違っています。
ちなみに、C:\Program Files\WindowsApps を開こうとすると、
「このフォルダーへアクセスするアクセス許可が拒否されています。」というメッセージが出ます。
無視して進めれば、通常の動作をしているように見えます（今のところトラブルは起こりません）が、何が起こっているのでしょうか？
どうすれば、このメッセージを消すことが出来るのでしょうか？
C:\Program Files\WindowsApps\Microsoft.549981C3F5F10_3.2202.10603.0_x64_...\Win32Bridge.Server.exe
ファンクションが間違っています。
ちなみに、C:\Program Files\WindowsApps を開こうとすると、
「このフォルダーへアクセスするアクセス許可が拒否されています。」というメッセージが出ます。
High CPU Usage
My CPU usage shows almost 100% for sometime when I start my system or even sometime while working too. It remains at 100% for almost 15 - 20 min or more even when application is open. I tried all options in Auslogics to resolve it out but nothing is working.
Please suggest for any further option which can help out.
Please suggest for any further option which can help out.
boot speed
Dear Sir,
I had purchased your software to solve issues like slow booting , taking more time in opening software etc
Till today after running all programs from your software , I find no improvement in boot speed etc.
Please let know how to solve the problems
regards
t k venkatesh
I had purchased your software to solve issues like slow booting , taking more time in opening software etc
Till today after running all programs from your software , I find no improvement in boot speed etc.
Please let know how to solve the problems
regards
t k venkatesh
Not able to install an upgrade for Boostspeed 12.2.0.0
I am unable to install the upgrade for Boostspeed 12..2.0.0 to 12.2.0.1
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0
I registered my account to windows insider but when I click get started in my computer's settings, it tell me that "we can't talk to our service at this moment please try again later", I tried this again and again but it does the same.
I registered my account to windows insider but when I click get started in my computer's settings, it tell me that "we can't talk to our service at this moment please try again later", I tried this again and again but it does the same. I tried a lot of fixese but they all don't work.
New in blog
See allRecommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7