WHEN I TRY TO USE THIS VERSION, IT STATES I HAVE ONLY THE FREE VERSION, AND WHEN I TRY TO USE THE PRO VERSION THE WEBSITE WANTS ME TO PAY FOR IT AGAIN,BUT SAYS IT IS REGISTERED ALL OK
FOR EXAMPLE WHEN I TRY TO DEFRAG, IT ONLY DEFRAGS, I CAN NO LONGER DEFRAG AND OPTIMSE MY DISCS AS BEFORE
THIS IS REALLY FRUSTRATING AS I HAVE BEEN A LONG TIME SUBSCRIBER
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Hello Support. On 02/13/20 I purchased an iBUYPOWER gaming desktop from BestBuy:
•model BB971 which includes the TUF B365M-PLUS Gaming ASUS motherboard, Intel 15-9400F, 6-Core 2.9GHz (4.1 GHz Turbo) NVIDIA GeForce GTX 1660 6GB. It has a 240GB solid state drive & 1TB SATA III hard drive. And includes Windows 10 home edition. (see CPUID report attached for further description)
However it continues to freeze up at various times throughout the day for typically about 4 seconds. So I tried a number of repairs after researching this problem on the internet; where I saw that many other people have had this same issue. None of those repairs have worked so far. Notably, I have NOT revised the BIOS as it appears to have the latest version: 1201 dated 07/15/19.
Do you have a solution for this? I love this desktop and have already loaded all my applications, so really don’t want to return it for a new one.
1. Any suggestions as to getting the external WiFi USB adaptor that I already bought to work?
2. or do I need to get/install some sort of PCI wifi adaptor/card?
Or what... help?
Slot3 / X1PCIEXP2: Available
Slot4 / X4PCIEXP: Available
Version: KBC Version 05.39
Serial Number: PESUC0ECY9Y2X0
Port Connector 0: Keyboard Port
Port Connector 1: Mouse Port
Port Connector 2: Serial Port 16550A Compatible
Port Connector 3: Serial Port 16550A Compatible
Port Connector 4: Video Port
Port Connector 5: Video Port
Port Connector 6: Video Port
Port Connector 7: Network Port
Port Connector 8: Audio Port
Port Connector 9: Audio Port
Port Connector 10: Audio Port
Port Connector 11: Audio Port
Port Connector 12: Audio Port
Port Connector 13: USB
Port Connector 14: USB
Port Connector 15: USB
Port Connector 16: USB
Port Connector 17: USB
Port Connector 18: USB
Port Connector 19: USB
Port Connector 20: USB
Port Connector 21: USB
Port Connector 22: USB
Port Connector 23: USB
Port Connector 24: 8251 Compatible
Port Connector 25: 8251 Compatible
Port Connector 26: 8251 Compatible
Port Connector 27: 8251 Compatible
Port Connector 28: 8251 Compatible
Port Connector 29: None
Port Connector 30: None
Port Connector 31: None
Port Connector 32: None
Port Connector 33: None
Port Connector 34: None
Port Connector 35: None
Port Connector 36: None
Port Connector 37: Keyboard Port
Slot1 / X16PCIEXP: In Use
Slot2 / X1PCIEXP1: In Use
Slot3 / X1PCIEXP2: Available
Slot4 / X4PCIEXP: Available
Name: N01 Ver. 02.47
Version: N01 Ver. 02.47
Copyright: HPQOEM - 0
Size: 16,384 KB
desideravo un Vs. consiglio:
sono già in possesso di Auslogics Disk Defrag 9.
Per migliorare in generale le prestazioni del mio computer sono indeciso se acquistare:
A) Driver Updater
B) BoostSpeed 11
domanda: BoostSpeed 11 include già anche Driver Updater ?
... non vorrei acquistare programmi uguali ...
Cosa mi consigliate di acquistare? Driver Updater oppure BoostSpeed 11 ?
Grazie e un cordiale saluto.
MS Excel does not open on click, need to go to File Open. When received as an email attachment, MS Excel only opens a blank grey screen. Can only open after saving attachment then doing a File Open.
Tried the DDE thinh and your software said it had made the necessary changes to allow MSExcel files to be opened by clicking on them rather than using File Open
plz help.. i had also bought/registered em auslogics driver installer but it kept on crashing and last hour an error came up saying some f***in file was missing and shit.I DIDNT EVEN TOUCH ANYTHIN. i hav avg anti antivirus (thot) and kaspersky tdss killerso yeaa i ran a deep scan and a root kit scan but alas no virus was found either. SO PLZZ HELPP my ames keeeeeep on crashing and stuff
whenever i open somethin well, it only stays 'opened' for like a min or half and then my whole system freezes. i had earlier enabled that whenever there gonna be critical error, bootspeed's gonna restart my system and stuff
SO THAT MEANS WELL IF MY SYSTEM KEEPS ON RESTARTING ON ITS OWN THEN IT EXPERIENCING SOME CRITICAL ERRORS
plz helpp i hv had enough of this shit plzzzz !
i cant even add a file cos my system keeps hangin so i cant even snap a screenshot
plzzz devs help plzz
While running the BoostSpeed full system scan, it was taking forever, (around 50 minutes to get to 25% of scanning files). I checked the details and found that it was working its way through the default_error_stack files (several hundred thousand of them) in the windows\system32 folder. because of this I stopped the scan and now need to know how to get rid of these files or get BoostSped to bypass them