1859 questions
Windows 11 Doesn't Hibernate on Alienware and HP Probook Laptops Anymore
I have two laptops, one an Alienware and the other an HP Probook, on which I have installed Boostspeed 13. Since installing on both PCs, neither hibernates anymore. They both sleep appropriately, but they don't hibernate. This was never an issue with Boostspeed 12. What has changed with the new software and how can I re-enable hibernation on both?
computer slow
hello my computer is 7 yrs old barely anything on it but slow what can i do to improve overall maintenance
MICROSFT 11
The lap top I use is fairly new, but is running windoews 10 pro, Microsoft constantly urge me to load certain up dates and when I try the message is cannot comply you need to purchase windows 365 for instance, but I have a perfectly good windows office already loaded can I stop the 365 nonsense or must i spend and buy 365.
fail fast exception
when attempting to open Scanner, i receive the above message, but no information is given.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
I have tested the scanner (epson xp 510) on another pc with no problems.
I have checked for virus, checked drivers, but no response.
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
Latest update
Latest update for boostspeed will not install. I have 13.0.0.1........ 13.0.0.2 will not install.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
software Auslogics
On the 24 th of november I purchased Auslogics essential tools. I had a pop up that i could receive Auslogics Bitreplica for free. I would get a code in my mail so i can register. never had the code. Can you send the code so that I can use the program?
profile
i have windows 7 windows will log me on as temp profile unsted of administrater i googled this question and is sent me to your site says to download your registery cleaner run it and myproblem is solved but it didnt work please help
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
Bluetooth não conecta após usar softwares Auslogics
Olá! Após usar os produtos da Auslogics, Driver Updater e BootSpeed, não consigo conectar dispositivos via bluetooth. Há alguma configuração que possa resolver?
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
Установка обновления.
Не могу установить обновление для Windows 10 Pro Version 20H2 для систем на базе процессоров х64 (KB 5001716), 2023-05
Все время выдается Ошибка скачивания - 0х80070643!
Очень прошу помочь! Заранее большое СПАСИБО!
Все время выдается Ошибка скачивания - 0х80070643!
Очень прошу помочь! Заранее большое СПАСИБО!
Gerenciador de dispositivos
Quria programar a hora da luminusidade do écran mas não consigo, poderá ter sido da desfragmentação?
Problème fonctionnement Bluetooth
Bonjour, suite à une mise à jour de Windows (?), mon clavier Bluetooth n'est plus reconnu. Dans "paramètres", il est indiqué : installation bloquée par stratégie de groupe.
Que dois-je faire pour réutiliser mon clacier normalement ?
Merci par avance
Cordialement
Que dois-je faire pour réutiliser mon clacier normalement ?
Merci par avance
Cordialement
Cannot reinstall MS365 after gone missing
my current & active MS365 suite just vanished from the system, and when I try to download/install the apps on my laptop, it get all the way through the process untl final 10% when get error mressage 30015-11(3221225506). I have dismounterd all system defence software (firewalls, defender, anti-virus) while downloading to remove these as potential constraints, and I have enabled the Windows Update features on the services list (cmd - services.msc)- which were showing as disabled. These however always revert back to 'disabled' once leave the page/screen. I also ran sfc /scannow to check for corrupted files - but all good. Can you assist please
Is my subscription good for another device?
How many devices are covered by my subscription?
I have another laptop that I want this service on.
Guy Veasey
I have another laptop that I want this service on.
Guy Veasey
Auslogics BoostSpeed 13のアップデート
Auslogics BoostSpeed 13のアップデート案内は来るのですが
Auslogics BoostSpeed 13.0.0.5及び
Auslogics BoostSpeed 13.0.0.6まアップデートは
案内通り実行しても、何回も実行してもアップデート出来ません
対処方法は有るのでしょうか・・・・・
Auslogics BoostSpeed 13.0.0.5及び
Auslogics BoostSpeed 13.0.0.6まアップデートは
案内通り実行しても、何回も実行してもアップデート出来ません
対処方法は有るのでしょうか・・・・・
Intergrate software/APPS
I have 2 dictionary appsw on my comp[uter/desktop. But I can't seem to get them on WORD, a microsoft program. Do I have to add them as an ADD-ON?
SSD
I am using an SSD and read that you should not defrag them.
Is it ok to use your program to do this, is says 9.9 % fragmented?
Thanks
Is it ok to use your program to do this, is says 9.9 % fragmented?
Thanks
no moving
hi,
I would like to move files (pictures) from an internal SSD to an external HDD. It is not possible: I receve error code 0x80070079.
I have Win 10 on my laptop and everything seems working properly so far.
thank you,
Istvan
I would like to move files (pictures) from an internal SSD to an external HDD. It is not possible: I receve error code 0x80070079.
I have Win 10 on my laptop and everything seems working properly so far.
thank you,
Istvan
Question about All my 'Subscriptions?
I have an important Question regarding with my 'Subscriptions: 1 Question: After an Year time are All my 'Subscriptions with Auslogics will Renew Automatically?...or After an Year time when my subscriptions will gonna expire should I buy New Licenses for all my Subcriptions again, I mean do i need to do it manually?again? Please Let me know? thanks!
Defragmentierung einer virtuellen Festplatte
Kann man virtuelle Festplatten mit Eurem System Defragmentieren. Zum Beispiel über eine erweiterte Auswahl.
Disk Defrag
HI,i have noticed a few times now that when all disks are checked my C; SSD disk gets stuck at around 71% and doesnt complete.All other SSD: ( D; E; ) finish. Even then when i stop the optimisation and uncheck disks E and D then try running just C; it still gets stuck. The only way then is to restart my PC and run optimisation only on C; it finishes the run. Its only a small hick up but i thought it best to make you aware of this/
won't post
Good Day!
I hope this finds you well! I am tryinbg to install the above graphics card to my system (ASRock RX 6800 Phantom Gaming Graphics Card) and I am not getting my system to post. I am runing a Ryze 7 3800X on an ASRock B550M Pro4 motherboard, with 32 GB RAM, a 1TB Corsair NvMe card in the 4.0 PCIe slot, 500 GB NVMe card in the other 3.0 M2 slot, 500 GB digital drive and a 4 TB Hard Drive internally. This is all powered with a 800W PSU.
The card has been tested and is good, what am I missing to make this card post?!!
Let me just say thank you in advance! I appreciate the offer of help!
djmes
I hope this finds you well! I am tryinbg to install the above graphics card to my system (ASRock RX 6800 Phantom Gaming Graphics Card) and I am not getting my system to post. I am runing a Ryze 7 3800X on an ASRock B550M Pro4 motherboard, with 32 GB RAM, a 1TB Corsair NvMe card in the 4.0 PCIe slot, 500 GB NVMe card in the other 3.0 M2 slot, 500 GB digital drive and a 4 TB Hard Drive internally. This is all powered with a 800W PSU.
The card has been tested and is good, what am I missing to make this card post?!!
Let me just say thank you in advance! I appreciate the offer of help!
djmes
DSN resolution failing
I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection