1447 questions
G-HUB
Since I updated the USB driver my G-HUB with logitech dosn't recognice my keyboard or mouse. What shall I do?
Bricked my HP Evo Prod ID 669a1ua after driver update
So I'm old-school (DOS Win 3.11) computer-savvy...but not much more (never heard of secure boot/TPM/Bitlocker - until I used your program to update a bunch of drivers (probabally the BIOS) and I got BSOD demanding Bitlocker key and after 3 days found no darn way around it. Finally went to HP Cloud recovery (supposed to resture factory config) but this tool does not work for me (gets stuck in a boot loop...internet search did not reveal fix/work-around that I haddn't tried; i.e at the BIOS I turned off Secure boot, allowed USB Boot, made that the first boot device...even tried re-directing the boot loader to the flash drive...but I digress).
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Windows Update
Error message: "Your device is missing important security and quality fixes.", tried several fixes...no result.
Mots de passe
Bonjour,
BootSpeed a chaque analyse du système, il me supprime les mot de passe et a chaque fois je suis obligé de resaisir ce dernier.
Comment effectuer de facon que BS ne supprime plus les mots de passe ?
Cordialement
Denis Schmitt
BootSpeed a chaque analyse du système, il me supprime les mot de passe et a chaque fois je suis obligé de resaisir ce dernier.
Comment effectuer de facon que BS ne supprime plus les mots de passe ?
Cordialement
Denis Schmitt
Front USB ports stopped working after switching heat sink
I had my PC repaired (for a new heat sink) and
now, the USB Ports on the front of the PC don't
work anymore. The back ones work fine.
Is there an easy fix?
Anti-virus
Bonjour !!
J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.
Dois-je craindre la même chose avec CCLEANER ?
Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...
Cordialement,
Eric
J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.
Dois-je craindre la même chose avec CCLEANER ?
Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...
Cordialement,
Eric
Velocidad de la computadora
¿Qué puedo hacer para que mi computadora siempre funcione lo más rápido posible?
Problème fonctionnement Bluetooth
Bonjour, suite à une mise à jour de Windows (?), mon clavier Bluetooth n'est plus reconnu. Dans "paramètres", il est indiqué : installation bloquée par stratégie de groupe.
Que dois-je faire pour réutiliser mon clacier normalement ?
Merci par avance
Cordialement
Que dois-je faire pour réutiliser mon clacier normalement ?
Merci par avance
Cordialement
Quicken Lock
Occassionally, Quicken crashes. When it does, I must either force quit BoostSpeed or Restart my computer. This is because BoostSpeed locks the Quicken data file. I would like to exclude this file (or the containing folder) from any scanning or "interference" from BoostSpeed - can I do this? Is there any way to prevent BoostSpeed from tormenting my Quicken Files?
MAPPING USB PORTS TO COM PORTS
Im having trouble with not enough COM Ports for external, USB devices.
With only 1 Si Labs Enhanced and Standard port, and 1 port for the system, as seen in Device Manage, how can I run, for example, more than one sftwr program - intended for a Ham radio transceiver - plus an external, USB microphone plus other external HDD, with or without an external USB Hub?
Why does my HP All-in-one, WIN11 system, work with the internal camera but NOT the internal microphone?
Do I need "virtual ports"? Do I need special drivers and/or hardware?
Thanks.
Phil
fenetre d'erreur dans messagerie
Bonjour,
Ma messagerie Thunderbird (plusieurs comptes actifs) semble fonctionner correctement, mais depuis quelques semaines s'ouvre une fenêtre d'erreur (en pièce jointe) dont je n'arrive pas à supprimer la cause.
Pourriez-vous m'aider ?
Merci d'avance, cordialement.
Denis LO JACOMO
Ma messagerie Thunderbird (plusieurs comptes actifs) semble fonctionner correctement, mais depuis quelques semaines s'ouvre une fenêtre d'erreur (en pièce jointe) dont je n'arrive pas à supprimer la cause.
Pourriez-vous m'aider ?
Merci d'avance, cordialement.
Denis LO JACOMO
After using Auslogics Boot Speed 13 (Pro) and restaring the Windows, the screen becomes black.
Hi there,
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
Slow Computer Speed
How can we speed up internet connections? If we disable numerous threads, do we make it harder to connect with various sites?
Looking For a Software Replacement
I am looking for software that will replace at least all of the features of McAfe Life Sale and some. Do you have a software program(s) that will do this and if so what are they and how much do they cost?
Auslogics Bitreplica vs
Dear Auslogics Team,
Please, tell me: can I use Auslogics Bitreplica to create the full system and disk images?
Thank you.
With regards.
Richard.
Please, tell me: can I use Auslogics Bitreplica to create the full system and disk images?
Thank you.
With regards.
Richard.