windows 10 not loading properly
auslogics boostspeed 12
WHEN I TRY TO USE THIS VERSION, IT STATES I HAVE ONLY THE FREE VERSION, AND WHEN I TRY TO USE THE PRO VERSION THE WEBSITE WANTS ME TO PAY FOR IT AGAIN,BUT SAYS IT IS REGISTERED ALL OK
FOR EXAMPLE WHEN I TRY TO DEFRAG, IT ONLY DEFRAGS, I CAN NO LONGER DEFRAG AND OPTIMSE MY DISCS AS BEFORE
THIS IS REALLY FRUSTRATING AS I HAVE BEEN A LONG TIME SUBSCRIBER
Not able to install an upgrade for Boostspeed 18.104.22.168
After completion of the upgrade software, the Help box remains showing my Version as 22.214.171.124
проблема с регистрацией
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Drive C: - Reports Disk has errors
Despite the statement that the report provides details on disk error check AND REPAIR RESULTS, the report simply states that my C:Drive has errors.
There is no indication as to what the errors are or that they have been repaired; on the contrary the errors have not been identified nor have they apparently been repaired.
How do I find out what the errors are and how do I repair them?
Regards, Harry McBride
System Information Report
Name: Reallocated sector count
Raw Data: 522
What does this mean and how do I fix it?
Delete wrong user
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
Windows refusing access as administrator
Could not activated my license
Program not registered
Activating Software Problem
I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
BOOT SPEED PRO
I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?
Aktivation not Possibel
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Auslogics 12 is blocked by Windows 10
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
About Auslogics BoostSpeed 12
Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします
Unable to Send / Receive emails
Since installing your software I am now unable to receive email via MS Outlook -
Printer not connecting
I recently used Auslogics to clean my computer. I believe I went to "optimize" to perform a deeper clean up. The question came up at the end to clean which I clicked on. My printer is now showing default, I cannot get it to connect to my internet either by the "wizard" or manually. HELP!!!
Unable to uninstall application using Uninstall Manager of Boostspeed 11
I installed SmartDraw2020 application (free version) from the Net. Now, when I want to uninstall it, it is not showing up either in control panel or in BoostSpeed under Uninstall Manager tab. There is Uninstall option for this App when I access through Windows 10 Start Menu (see screenshot attached), but it is not uninstalling from there, due to some error (Could not open Install.log file message).
I am surprised why it is not even listed in Boostspeed under Uninstall Manager. Can you please help me?
I am not getting full gigabit speed on only my computer.
Hello all, happy holidays!
Unfortunately things aren't so smooth for me right now, I have just installed gigabit internet in my home, but I'm having the problem that my computer is not getting the full speed. I know the modem is putting out 940 average, because I have an eero Pro connected to it and that reads 940, and my dad's laptop on wired connection also reads 900 average, it is only my computer that is not getting the full speed on the same wired connection. It gets on average 250 Mbps, sometimes stooping lower and upload is always the same speed at 40 Mbps up.
I am using a Cat6 cable not 5 ft from the standard xfinity modem, I have reset my network settings and flushed my DNS. I have used DNS Benchmark to make a custom list of the fastest DNS Servers for me. I have downloaded and check my ethernet adapter with Intel PROSET and everything checks out. My adapter has a max speed of 1 Gbps (Intel(R) Ethernet Connection (2) I218-V). I have run virus and malware scans and came out clean. I have tried disabling windows firewall and running only ipv4 or 6. Among other things I have tried A LOT of troubleshooting and my knowledge has limited me at this point
I've uninstalled and reinstalled boostpeed 11 four times now. Is there a bug on the task scheduler. it's kee[s crashing the program. and I have to manually start the maintenanace daily now.
Latest BoostSpeed Version
This is becomming annoying. I keep getting alerted that a new version of BoostSpeed is available. I've downloaded 126.96.36.199 and ran the installation which prompts that it is removing with re-start and then I have to manually install the latest download. After three successful runs with this I still end up with version 188.8.131.52 What gives?
What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".
Press continue or press del to load bios setup.
Failed Windows Updates
(2019-10 Cumulative Update for Windows 10 Version 1903 for x64-based Systems (KB4517389) - Error 0x80070002)
My system is a Lenovo Think Centre w/I5 Processor.(M91)
BoostSpeed wird permanent von Avira gelöscht
Sehr geehrte Damen und Herren,
mein Antivirusprogramm "Avira Antivirus Pro" stuft BoostSpeed permanent als Bedrohung ein und löscht es.
Gestern wurde BoostSpeed 3x gelöscht!
Hierfür hätte ich gerne eine Lösung von Ihnen erfahren.
Mit freundlichen Grüßen
Remote Desktop Service is disable by some process
My IT department believes some way the Auslogics BoostSpeed 11 software is disableing the Remote Desktop Service. I work from home offten and I need to connect to this PC to develop and technical support of our users. How can I find if your application is changing the service to disabled?
Two issues:Text freezes and unsatisfactory settings
Also - despite my choice of most comfertable writing thumbnail - set my screen too bright with choppy text.
after todays update the sound icon when clicked upon appears ok but as soon as the mouse is moved to adjust the sound the icon disappears
What can I do to bring it back to normal?
By the way: the subcategory is too limited to direct the problem to the right technician in the correct dept.
All of my flash drives are not recognized, irrespective of the USB port, I use. How do I reactivate the USB ports so as to recognized the flash drives?
Screens Blacks Out (Stops Displaying on Minor Electricity Surges from Fridge-Freezer)
I have bootswpeed 5 on windows 7. I recently purchases 11 for other windows 10 computer.. I downloaded 11 on windows 7 and now have access to bootspeed 5 and 11 on this 7 computer. Revo uninstaller does not show 5. best way to uninstall bootspeed 5? thanks, jimz
Compare configuration changes in boostspeed
I have your software in three computers as the license allows, but I can't find how to compare configuration between them, specially in the custom scan and clean for boostspeed. For example in one computer my login screen still shows the photo microsoft chooses, but on the other it doesn't. Maybe you have that in a config or xml file. It may be good to be able to compare.
issue while booting
When I turn on my pc,
after windows logo a blank screen comes for about 3-4 min.
then a "please wait" loop comes which lasts for about 1 min.
My PC: It's a prebuilt "ACER Veriton series."
I cant find my real windows key even tho i brought it and it was online