Device-related issues

Drive is 81% fragmented and disk defragmenter does not defrag, just states completed. How to get the drive to defrag/optimize?

normalement les SSD n doivent pas être défragmenter .... comment désactiver la déframentation sur votre logiciel

merci de votre réponse codialement

As a result of system optimization, I receive the message "The graphics adapter performance index is 8.1, which is lower than the average system performance index of 9.1. It is recommended that you replace the graphics adapter with a more powerful one."
My question: Does this affect overall system performance? What will change if I replace the video card with a more powerful one, given that I do not play video games?

hI
Glad I got Boost 13
I have heard you should never defrag an ssd. I sthat true?
Thanks
Hugh

Name, Value, Advanced
Problem Devices
RAID Controller, PCI\VEN_11AB&DEV_6440&SUBSYS_644011AB&REV_02\4&15442326&0&0008, Device drivers are not installed


I am using SSD drives in an old Lenovo C20 ThinkStation, designed to run servers, as a standard PC
Do I still need to enable RAID Controller in this device.
Should I disable it, or install the drivers as requested

warum fällt die tastatur bei einem notebook von captiva gekauft 01.01..2021 komplett aus diesess schreibe ich mit der bildschirmtastatur. neupreis: 1.459,- €

CAPTIVA 43,9 cm (17.3") GB7 726IG 20V1
(PB71DDS-G) RTX 2060 6GB/FHD 144 Hz NB
WVA/i7-10750H/MC/SSD 500GB/HDD
1TB/32768/WLAN/BT/w/o OS
1 1459,00 1459,00St
201,24Umsatzsteuer 16 %
1.459,00Summe Brutto
1.459,00Endsumme
EUR
EUR
EUR
1.257,76Gesamt Netto 16 % EUR
Zahlbar per Paypal
DHL National Standard
Zahlung:
Spediteur:
Bedingungen:

inbetriebnahme im januar 2021, ausfall tastatur anfang april 2024

I have this problem for many years now and I cannot find out what’s happening. When I start Windows, I hear a number of times the ding dong sound of hardware that is connecting and disconnecting. When I look into the Control Panel > Devices and printers, I see an icon showing up and disappearing. The label says: Unknown USB device (Device Descriptor Request failed). I checked all hardware connected to the PC more than once and for each piece of hardware there’s is an icon in the Control Panel. So I really don’t know to which piece of hardware this additional icon is related. After about 20 ding dongs, the sounds stops by itself. Sometimes this issue has gone for some time, but it returns as suddenly as it has been gone.
Any comment on this issue would be appreciated.

I made a .nfo file, but I cannot attach this file to this request form.

Im having trouble with not enough COM Ports for external, USB devices.

With only 1 Si Labs Enhanced and Standard port, and 1 port for the system, as seen in Device Manage, how can I run, for example, more than one sftwr program - intended for a Ham radio transceiver - plus an external, USB microphone plus other external HDD, with or without an external USB Hub?

Why does my HP All-in-one, WIN11 system, work with the internal camera but NOT the internal microphone?

Do I need "virtual ports"? Do I need special drivers and/or hardware?

Thanks.

Phil

I had my PC repaired (for a new heat sink) and
now, the USB Ports on the front of the PC don't
work anymore. The back ones work fine.
Is there an easy fix?

boa noite, eu comprei um ssd no alixpress, la dizia que era 7800 mbps de leitura e escrita, logo quando chegou ele chegava a 3900 apenas tanto de escrita quanto de leitura mas n me encomodava isso, de ontem pra ca o computador começou a travar muito e eu passei o crystal disk mark e dava apenas 140 de leitura e 72 de escrita, ja fiz de tudo mas n resolve, tem 1 mes so que comprei o ssd novo, ja formatei o pc, ja usei sfc /scannow , CHKDSK /R , DISM todos disseram que nao tinham erros, ja desfragmentei ele aqui no app mas continua da mesma forma.

I have about a dozen 2.5" & 3.5" SATA HDs, no bigger than 4TB that I have been using for years without issue. They are used in conjunction with via a WAVLINK eternal docking station, holds 2 drives" to USB. Recently, one HDs, 3TB one, when I tried to use it, I got an error message, "invalid parameter", "drive is not accessible or corrupted" or something like that. So I used the DSK command in Window 11 and it showed up as a "healthy drive" but showed up as "RAW" (needed to be formatted basically of course) instead of NTFS as it should be. I took this situation to be a fluke but just now, with two 4TB drives in at the same time in the docking station, the same thing happened TO THEM BOTH. I had them connect to my laptop for several hours then suddenly got the "drive not accessible" error.  Same issue as before basically and back to RAW. Correct me if I'm wrong but does this very likely indicate that the docking station is creating this problem all of a sudden? It's either that or my laptop is sending something out to the drives that is causing this. Give me your opinion. My bottom question is, I'm assuming the MBR got corrupted or disappeared, of course there could be something else but it's been a very long time since I have messed with HDs on this level. Is there any way without having to send the drives out to have them professionally recovered, something I can do myself at home to re access the drives normally? Thanks in advance, Jim.

Screen flickering occurs while downloading ".acsm" files.

Windows 11 will not recognize and allow either of these two really nice, brand new, input devices to operate in the windows environment.

I've used the Auslogics Driver Updated version 2 to make sure all the drivers were current and operational.

I'm running a MSI Rader GE76 12UE 871, with 64 GB Ram, and 3 TB of SSD storage. I've also verified with the MSI Support site that I'm running the latest version of BIOS.

Everything else seems to run just fine.

I can utilize any BT keyboard and mouse without issue.

When I boot the system into BIOS setup, the USB G203 mouse works just fine and allow me to make any selections that I might need. I've also taken both devices to my wife's laptop and they both work just fine there as well so I'm fairly positive there is some setting in the windows environment that has become corrupted and will not allow me to uise these nice devices.

can you please help me fix my sound. it doesnot work!

My computer does not see any phones connected via USB cable. I tried changing both phones and cables. The computer sees the component itself but cannot access it in the hard drive menu. I always give access to files on the phone and the phone itself charges normally

The printer is online (lamp lights up, I have checked the connections) but the display constantly shows ‘on error state’, Windows Help does not help. What else can I do?
Thank you very much