Most Viewed questions

При работе с Windows 10 постоянно висит система и в диспетчере задач отображено что загрузка диска 100%

Hi,
I did a rigorous cleanup and driver update on a old(er) laptop, after years of limited maintenance. Using Auslogic software (driver update,bootspeed,duplicate finder) and some manual cleaning/updating, Something went wrong, not sure exactly where. Now I can not use/connect bluetooth devices anymore. I tried to solve it by doing some reasearch on the internet but can not find the solution. Otherwise the Laptop is working fine and is a lot faster.
Enclosed you will find some information of the laptop and screenshots of what I think is relevant information.
I also noticed that Bluetooth is not longer available at the 'action center' and 'device manager'. The latter one still shows some bluetooth devices but is hidden and do not seem to be the relevant items.
In 'Settings> bluetooth and other devices', the previously connected bluetooth devices are still there but it clearly states that bluetooth is turned off.
Could you please advise me on how to solve this.

Enclosed a couple of prinscreens of the systems and the above mentioned screens.
FYI I am an experienced user, however certanly not a Windows specialist.

Kind regards.

Perry Parengkuan

Dear sir,
I have hp15s laptop. the battery iof the laptop is not visible. and whenever i remove the charging cable the laptop turns off automaticaly. how can i check if my battery is realy worn out or there is some issue with the connector

Hi,let say I like your software very much. Please show me how to end error message form BS "interupted DNS" from Surfshark

How bring Motherboard up to date when it is 11 years old and running windows 10 ok I don't have aTPM 2.0 conection avalable or anything else that will make it happen?

I used Windows to uninstall this software. Is there anyway to find out if there was any junk left behind?
Or on any software that has been uninstalled with the Windows Programs.

This morning I could play videos from the internet and tonight I'm not able to. Please give me suggestions to fix this.

The error message says:

(Playback ID: vnJN0H3RgwlSS4V0)
https://youtu.be/u-BqgHfeZss


Lori

Проблеми с пуском из за того что ставлю найвисший приоритет в елекропитание видеокарти.Незнаю как решить ету проблему,также после обновления видеокарты .HD5000 виндовс делает перезагрузку системи и появляеца синий екран смерти.До обновлений драйверов видеокарти и обновлений виндовс таких проблем ненаблудалось.

When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.

Unused application files

C\windows\software distribution\datastore\logs\edbtmp.log

Could you help me resolve pleaase.

Hello, can you help me fix my problem!
What do i do if when my wireless hadphones connect to the laptop the sound is still comming from the laptops speaker

Добрый день!

Скажите, пожалуйста, что нужно сделать, чтобы в окне сообщения отображался предпросмотр вложенного в сообщение файла программ MS Office в форматах Excel и Word (в то же время предпросмотр вложенных в сообщения файлов в формате .pdf отображается нормально)? Я пробовал разные варианты, которые рекомендуются в интернет - ничего не помогает.
Похожая проблема с невозможностью отображения предпросмотра файлов Excwl в проводнике, в то время как файлы других форматов (кроме Excel) отображаются.
Смотри приложенные скриншоты.

Это взаимосвязанные проблемы (отображение предпросмотра файлов в Outlook и проводнике)?
Что нужно сделать, чтобы решить эти проблемы? Прежде всего нужно решить проблему в Outlook.

Спасибо!
Всеволод

Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!

Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.

the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.

Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).

What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.

Cool?

hi

how are you

i need help please

i have like a lot of issues with my network ( dns - dhcp - ,,,,, etc ) a lot of them


thanks ^^

В чем коротко отличие оптимизации от дефрагментации HDD ?

how can i set a system backup?

Lanovo with windows 10

Just upgraded to latest BoostSpeed 11 and have a problem I NEVER had with the precious version ~ 245 traces in the broswer SKIPPED! Made repeated attempts, alwys 245 skipped! Not good!-

PS, forcing a "Subcatagory" selrection makes ZERO sense. the categoriars are inane!

Enabling TPM 2.0 on HP All In-One Model: 22-b020na

Can I uninstall my licence from one desktop and then re-install on a laptop?

When I right click on a shortcut on the desktop or on a file folder in the file explorer it can take up to 2 minutes to come up. Once it does everything exicutes normaly. If I right click on an empty space on the desktop or on a file in the explorer the contex menu works as it should.
I have uninstalled cortana, disabled all contex menu options with this program, and checked and repaired all regestery items. I don't have any idea what else to do. I use the right mouse click a lot and when the delay happens it is very disruptive to workflow.

Hey,
Im getting a lot of windows blue screens, Kernel issues and Server exceptions and memory as well, i did a lot of testings like memory testings, when i do windows file check, when i run CHKDSK check in cmd i get files are NTFS error, Any help?