941 questions
Dasboard SCAN cannot terminate CHROME.EXE
After running a SCAN, and choosing to resolve the issues that were found, BoostSpeed 13 is unable to terminate Chrome.exe.
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
In the list of termination failures there are several instance of Chrome.exe
Choosing IGNORE allows me to bypass the panel.
Boostspeed 13 is current with all maintenance
RE: Need browser attachment advice
I Can't upload files to websites using any browser on my windows 10 home edition.
Can you help me?
despues de suspender, arranca con TEMP
Puse mi desktop en modo SUSPENDER. y ahora arranca con un perfil TEM, como soluciono??
Boostspeed 13 startup externalized to Windows desktop every boot
Everytime I boot up my Windows 10 laptop, Boostspeed 13 i set to startup in the settings, however on each boot, the Boostspeed dashboard is extranalized to the Windows desktop and always at the Registry Analysis tab.
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
How can I stop the Boostspeed dashboard from being extranalized on every boot-up?
Spinner GIF Keeps Spinning on Some Websites
Whenever I go to a site that requires some time to load, e.g., http://www.fpcanada.ca/findaplanner
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
I keep seeing the spinnning GIF wheel as I wait for the web page to load, which it does not and then times out..
So far, it happens with Edge, Google, and Firefox. I have restarted several times and have cleared the cache, flushed DNS, reset the browsers, completed a deep clean, registry clean, and optimized internet settings with SpeedBoost, run two anti-virus malware programs (Windows Secuity and Malware Bytes), and have run memory diagnostics. All with the same result - no change.
Windows and the browsers are all up-to-date.
When I inspect the Javascript (>by right-clicking on the Spinner), I see that the Spinner is there and seems to be waiting.
Any suggestions?
Stopcode
Hi.
Windows crashes... I don't see any particular connection between the crashes except that I get this message...
windows.com/stopcode MEMORY_MANAGEMENT
any ideas? Thanks David
Windows crashes... I don't see any particular connection between the crashes except that I get this message...
windows.com/stopcode MEMORY_MANAGEMENT
any ideas? Thanks David
Annoying Windows Pop Up Notification
A few months ago, it started to show up an annoying Windows pop up message stating that my laptop (Lenovo, Windows 10) needs DirectPlay feature. I don't even know what is DirectPlay neither what is used for. The message displays two options: install or skip installation of DirectPlay. No matter what I choose it keeps showing up every time I turn on my laptop.
my question is: how can I get rid of this annoying pop up Windows notification?
my question is: how can I get rid of this annoying pop up Windows notification?
Memory Insufficient
I am running Auslogics Disk Defrag 11 on a Windows 2012 R2 server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
Drive local do Windows C:
I have on disk C: With 166 GB, the Windows 11 operating system and I just want the drive C: for Windows. In recent days it has been full and does not allow me to manage the available space, as it has free only 1.6 GB and honestly I do not know how to reduce files in C: which I find too risky because I can collapse the system. What was at risk of happening today. I ask: can you help me? Thanks
Manuel Araújo
Manuel Araújo
fichiers très très longs (240-250 caractères)
Solution pour les supprimer ils sont souvent dans USERS et/où windows 11
Moving the $HOME$ Folder to amother drive
1. I regularily reinstall my system and need to move the system directories to another location.
2. I have an application that is looking to install a directory on the $HOME$ directory - currently this is on my C Drive and I need to move it to the D Drive.
I am looking for a script that will change the $HOME$ folder to the D Drive.
Please an you help I currently use windows 10 but will eventually be upgrading to windows 11
2. I have an application that is looking to install a directory on the $HOME$ directory - currently this is on my C Drive and I need to move it to the D Drive.
I am looking for a script that will change the $HOME$ folder to the D Drive.
Please an you help I currently use windows 10 but will eventually be upgrading to windows 11
file explorer
since my updates yesterday file explorer has stopped working
I tried to reset using a previous reset point but that did not work
I tried to reset using a previous reset point but that did not work
Right mouse click or Double click slow respond
when I Right mouse click or Double click on a file it takes almost 90 second to 2 minutes to respond in window explorer
APPLICFAZIONI DISINSTALLATE
Vorrei eliminare i collgamenti dal menù start di applicazioni disinstallate in precedenza.
Come posso fare
Come posso fare
Проблема
Здравствуйте почему Ауслоджик удаляет установленные обновления и препятствует их загрузке.Можно ли востоновить установленные обновления.
USB Logitech G213 Keyboard and G203 Mouse will not connect and operate.
Windows 11 will not recognize and allow either of these two really nice, brand new, input devices to operate in the windows environment.
I've used the Auslogics Driver Updated version 2 to make sure all the drivers were current and operational.
I'm running a MSI Rader GE76 12UE 871, with 64 GB Ram, and 3 TB of SSD storage. I've also verified with the MSI Support site that I'm running the latest version of BIOS.
Everything else seems to run just fine.
I can utilize any BT keyboard and mouse without issue.
When I boot the system into BIOS setup, the USB G203 mouse works just fine and allow me to make any selections that I might need. I've also taken both devices to my wife's laptop and they both work just fine there as well so I'm fairly positive there is some setting in the windows environment that has become corrupted and will not allow me to uise these nice devices.
I've used the Auslogics Driver Updated version 2 to make sure all the drivers were current and operational.
I'm running a MSI Rader GE76 12UE 871, with 64 GB Ram, and 3 TB of SSD storage. I've also verified with the MSI Support site that I'm running the latest version of BIOS.
Everything else seems to run just fine.
I can utilize any BT keyboard and mouse without issue.
When I boot the system into BIOS setup, the USB G203 mouse works just fine and allow me to make any selections that I might need. I've also taken both devices to my wife's laptop and they both work just fine there as well so I'm fairly positive there is some setting in the windows environment that has become corrupted and will not allow me to uise these nice devices.
cleanup of the registry
how to eliminate all references to the installation of a software from the Windows registry, in order to completely clean the installation files still present in the system and which are not eliminated by uninstalling that program
Add Folder (PIN) to Quick Access Not Working
I log into my laptop as local user ACS_LLC but when logged in it shows my email as mikewruth@gmail.com
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
System Events Notification Service
I have been trying to fix an issue for 60 days now and I decided to purchase your software. At this time, I hope that I have purchased the correct program? My issue occurred when I decided to switch from Panda Dome anti-virus to Bitdefender (BD). During the installation, I got a prompt that stated for me to remove my Malwarebytes AV, which I did. However, BD gave me no notice about my Hitman Pro.Alert AV program. After I had installed BD, a few day later, (SEP 24), I ran a Hitman Pro.Alert scan. It found one item, a suspicous ".dll file" and asked if I wanted to quarantine or delete? To keep this short, I used the quarantine option, because if there were any issues, I could just remove the quarantine. Well, yes, there were immediate problems. My tool bar display changed and I found out quickly that I could not move pictures or files from (for example) Downloads to My Documents. It also affected my ability to use my graphic art software, such as COREL. There's a lot more to this and I am very disappointed with Sophos, who bought the rights to Hitman Pro and Hitman Pro.Alert. Bottom line, I was not able to restore this "quarantined .dll file."
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
Direct X won't install or go away
HI there, would love a solution for this window that keeps popping up and won't stop. I've clicked "Install" , "Cancel", have closed it and it just keep coming back non stop. please help!!!
IRQL NOT LESS OR EQUAL - PANTALLA AZUL AL PRENDER LAPTOP
BUENOS DIAS
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
RAM and CPU
Hello, my computer is not that powerful, ideapad 3i, sometimes the memory and processing gets saturated, I would like to know if in boostspeed there is a function to press a button and optimize the RAM memory of windows. Thank you
sCAN wINDOWS INSTALLATION ON OTHER dISK
I have lost the central vision in both my eyes and am in South America for 3 months visiting my kids.
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
Velocizzare apertura file cartelle e foto
Buongiorno,
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?
Edge permissions
I use Windows 11 and Edge is my default browser. I love Microsoft Edge but can't understand why every time I start my computer, Windows asks me twice to give permission for it to use Edge, and then later when I go to use Edge it asks me again.
Given that Microsoft has created both the software that runs my computer and also Microsoft Edge, I speculate it should be possible to avoid such an unecessary procedure. Will you please tell me how to do this? Thanks.
Given that Microsoft has created both the software that runs my computer and also Microsoft Edge, I speculate it should be possible to avoid such an unecessary procedure. Will you please tell me how to do this? Thanks.
WinSXS via Auslogics Windows Slimmer 4.0.0.6
Hello,
I wanted to know why, when I clean the WinSXS folder via Auslogics Windows Slimmer, I always have "1 ignored item" at the end, for a size exceeding 1.3 GB. In addition, I cannot see the item concerned. This problem occurs both with the PRO version of Windows Slimmer 4.0.0.6 and with the free version.
I also wanted to know how to delete it. I have already tried via CMD DISM, and DISM++, but CMD remains stuck at 70%, and DISM++ only deletes 200 MB.
Thanks in advance for your answer.
I wanted to know why, when I clean the WinSXS folder via Auslogics Windows Slimmer, I always have "1 ignored item" at the end, for a size exceeding 1.3 GB. In addition, I cannot see the item concerned. This problem occurs both with the PRO version of Windows Slimmer 4.0.0.6 and with the free version.
I also wanted to know how to delete it. I have already tried via CMD DISM, and DISM++, but CMD remains stuck at 70%, and DISM++ only deletes 200 MB.
Thanks in advance for your answer.
Delete all script typed into google search.
When I type something into incognito window,how do remove it so it can never appear again?