требуется помощь
Помогите разобраться .
Спасибо
Windows Performance
dcu.centennial://toasthandler
dcu.centennial://toasthandler/Create/NewUpdatesReadyToApply
What should be done?
Task Manager & Auslogics Registry Cleaner
Problem mit dem Optimieren in Disk Defrag 11
Ich benutze Windows 10, 64 bit.
file recovery
remarque
Je crois que ce sera plus rapide pour l'utilisateur si vous ajoutez un champ de recherche sur le tableau de bord (dashboard) pour acceder plus rapidement à un sous menu du logiciel.
Merci d'avance pour votre réponse.
Mes salutations.
HASP Question...
Q!uestion: Is there any Third Party solution softwares that can allow Xp era USB Dongle security keys to work on Window 11?
Opinion: I think the answer is NO... I look every once in a while to see on the Internet... But since you said I had a question open, I elected to ask you folks...
Comment: If I were to upgrade some of my Dongle licenses, (And,,, keep in mind that some companies went out of business long ago...) the cost would approach over a Half Million Dollars... They want me to purchase their newer version while my older versions work just fine on my Xp computer,,, when I need to run one of those programs... This is what I plan to do going forward, but if there was a way to run on Windows 11, I like to know how and where...
Comment: It is also been a good thing that many current computer software companies that maintain older versions of window fully understand why this is a good idea to contineue to do... I hope Auslogics does this too... I also put in a comment about your latest Driver software that when I tried it last fail to run on Windows 7 Pro... Not good! I am just pointing this out, because it needs to be pointed out...
tastatur
CAPTIVA 43,9 cm (17.3") GB7 726IG 20V1
(PB71DDS-G) RTX 2060 6GB/FHD 144 Hz NB
WVA/i7-10750H/MC/SSD 500GB/HDD
1TB/32768/WLAN/BT/w/o OS
1 1459,00 1459,00St
201,24Umsatzsteuer 16 %
1.459,00Summe Brutto
1.459,00Endsumme
EUR
EUR
EUR
1.257,76Gesamt Netto 16 % EUR
Zahlbar per Paypal
DHL National Standard
Zahlung:
Spediteur:
Bedingungen:
inbetriebnahme im januar 2021, ausfall tastatur anfang april 2024
Sound interface stopped working on Windows 11
When running on an Asus TUF H310M with a Core i5 9400F and 16GB of RAM, it was working just fine.
Now, on the new setup, a Gigabyte Aorus Elite B760M with a Core i5 13th gen and 32GB of DDR5 RAM, the installation and driver setup ran okay. However, when playing any kind of music or sound file in any player, including YouTube, streaming services, you name it, it doesn't work. The sound feels 'cropped'; it plays extremely slow and low pitched, clearly malfunctioning.
Cubase 12 doesn't even recognize the device or the ASIO drivers for configuration.
I've been using the Toneport KB37 for music production and as a general soundcard for years, and on the old PC, it still works perfectly.
The same USB cable is being used on both PCs.
Am I missing any kind of configuration, new driver, or something that could make it work with Windows 11?
Thanks in advance for your time and help. Any kind of tip or suggestion will be extremely appreciated.
Can I download any of your software on trial basis?
Presently I am on trial bases using Auslogics Registry Cleaner 10.
My question is simple. Can I download and install any of the software you offer on a trial basis and if yes please tell me how.
I am mostly curious about the computer speed up app version #13...
Thank you kindly-
Jackson
Free disk space issue
By the way, I wasn't sure what to pick above for "Device" so I randomly picked something.
PC not powering up
after replacing processor 1600 x to 5600 x and motherboard MSI B350m to ASUS B550m-a, PC won't power up when it was shut down for a few hours.. It will only start after multiple tries and cables disconnection.. etc after about 20 to 30 minutes.. Once it is up and running no issues whatsoever.. Now i leave it on sleep mode..
The new peocessor and motherboard are second hand ones..
We replaced CMOS battery but it did not solve the problem..
Any tips please?
Thank you
Drive is 81% fragmented and disk defragmenter does not defrag, just states completed.
RunDLL Error Messge keeps popping up
There was a problem starting TaskSchedulerHelper.dll The specified module could not be found.
Cannot access tools
Won't allow install
I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
Pro Version
Error 1605 and 1628
I am facing problem about error 1628 and 1605,can you help me to solve this problem?
WordPad problem
Think, it's the only problem I have with my PC and now ALL problems in the future are taken good care of with your comprehensive
system, thank you.
Regards
Henning Reckey
Re-enable the Windows key on the keyboard
Не получается запустить.
Доброй ночи.
Полную проверку системы и во время проверки я кое-что сделал, а что не знаю.
Программа не запускается а проблема в том что служба выключена...
(не удалось запустить службу nvidia localsystem container ошибка 14109)
empty folder cleaner
Hi. When i go into empty folder cleaner it will find; i.e *582 empty folders, i press delete, and when its finished it says 520 empty folders found and deleted 258 of them. They go to the recycle bin, which i then empty, but when i do a re-search for empty folders they are all back again. It never actually clears the whole amounts found. *These are the actual readings of my last scan, but the numbers are very close to what they are with every scan. Can you help please? Clive
Internet Explorer re install
Bonjour !
J'ai besoin d'utiliser internet Explorer pour activer un service (système d'authentification qui ne fonctionne qu'avec IE)
Or je ne trouve plus IE sur mon poste. Il n'apparait pas dans Panneau de configuration\Tous les Panneaux de configuration\Programmes et fonctionnalités\Activer ou désactiver des fonctionnalités windows
Je ne me souviens plus comment je n'ai dé"sisntallé, et je me demandais :
- si c'est un tweak de Bootspeed qui l'a désinstallé?
- comme faire pour le ré installer?
J'ai essayé de le re téléchargé en online et en offline mais impossible de termienr l'installation. Soit un message me dit qu'une version plus récente est installée, (Edge), soit l'installation s'arrête sans message d'erreur.
Merci !
Sylvain
PS : la sous-catégorie est obligatoire, mais Internet Explorer n'était pas listé, j'ai donc choisi une valeur approximative
原因不明起動しない
症状
電源を押す
電源ボタンとその隣の起動ボタンが伝統する(チカチカ。。。正常)
1分後消える
数分後 画面に「修復している」と出る
その後様々な修復Optionが出るが、起動していないので何もできない
。。
同じことを繰り返していると突然起動できる(現在のように)
上記の状態が前触れもなく発生する
RDP keeps disabling on every machine that has boostspeed installed
I notice that intermittently (seems to do it when it wants to), if I reboot a laptop or other physical endpoint, the machine will boot up with the "termservice" disabled, even though groupm policy enforces this to be on.
After troubleshooting group policy, uninstalling all other security software, and weeks of various other troubleshooting methods, the only commonality I can find is that all the machines that do this have boostspeed installed.
I found this post
https://qa.auslogics.com/question/225
And followed the instructions there. I also turned off the performance monitor in boostspeed via the settings, but the issue is still persisting. My next step I guess is to uninstall boostspeed from all of my machines but I figured I would reach out before I give up on the product.
Проблема со спящим режимом
Здравствуйте! Исчез совсем из настроек системы спящий режим, после работы программы, помогите исправить, заранее спасибо за безпокойство...
Windows Security - Account Protection
"Dynamic Lock is not working because Bluetooth is off."
I do not know what device to try to turn on to Bluetooth.
Thanks in anticipation.
Mike Kemp
Mobile:
ANTI-MALWARE PROGRAM CONFLICT W/NORTON SECURITY
Hello - I have your Auslogics Anti-Maleware program and recently added Norton Security. Norton security runs scans in the backgound and for some reason goes after the anti-malware prgram, esentially erasing it. However it leaves my Auslogics BoosSpeed & Auslogics Driver Update prgrams alone, so they continue to run fine. Now every day I have to re-load the anti-malwar program.
I went into Norton checking the Virus & Firewall settings which are set to "allow" your anti-malway program , but it still continues to erase the entire anti-malware application. Do you have any ideas on how to fix this in Norton..?
гибернация
Здравствуйте! прошу помочь. после гибернации комп сам через несколько минут включается. зарание спасибо.
NVIDIA 제어판이 안 켜져요
NVIDIA 제어판을 열려고 하면 계속 '현재 NVIDIA GPU에 연결된 디스플레이를 사용하고 있지 않습니다.' 라고 뜹니다. 어떻게 하면 돼나요?
Richiesta di un consiglio
Buongiorno,
desideravo un Vs. consiglio:
sono già in possesso di Auslogics Disk Defrag 9.
Per migliorare in generale le prestazioni del mio computer sono indeciso se acquistare:
A) Driver Updater
oppure
B) BoostSpeed 11
domanda: BoostSpeed 11 include già anche Driver Updater ?
... non vorrei acquistare programmi uguali ...
Cosa mi consigliate di acquistare? Driver Updater oppure BoostSpeed 11 ?
Grazie e un cordiale saluto.
default_error_stack
While running the BoostSpeed full system scan, it was taking forever, (around 50 minutes to get to 25% of scanning files). I checked the details and found that it was working its way through the default_error_stack files (several hundred thousand of them) in the windows\system32 folder. because of this I stopped the scan and now need to know how to get rid of these files or get BoostSped to bypass them
Two issues:Text freezes and unsatisfactory settings
Also - despite my choice of most comfertable writing thumbnail - set my screen too bright with choppy text.
Please advise
Jessica
UsoClient
Hello Auslogics
It seems that every day I get a warning message about a new 'Daily' task being created. That task is UsoClient (see attachment). There always seems to be three occurences of this program, despite this – so I guess that it is being deleted and recreated by Windows.
No doubt this is a Windows thing, but it would be good to understand what is going on here.
Also, if I try to disable it, despite being a local admin, I get an 'insufficient privs' error (see second attachment).
If this is deemed normal behaviour and the program is trustworthy, is there a way of disabling the warning message, but just for this one program?
Thanks and regards
Phil Parkin