943 questions
logiciels parasites
le lancement du courriel gmail et de google est vraiment très long.
d'autre part j'ai un une fenêtre d'information qui s'affiche de manière intempestive lorsque je suis connecté. Le logiciel qui a l'air de venir de windows, n'est pas supprimable
d'autre part j'ai un une fenêtre d'information qui s'affiche de manière intempestive lorsque je suis connecté. Le logiciel qui a l'air de venir de windows, n'est pas supprimable
Windows 11, PC Sleeps when it shouldn't
My W11 (Home edition) desktop PC has the following settings
'Power mode' set to 'Best performance' and
'When plugged in, put my device to sleep after' set to 'Never'.
Despite this, the PC goes to sleep after a few minutes of being idle, which in turn kills RDP sessions which I do not want to happen.
There must be other settings somewhere which are overriding the 'Never' setting. Please help me understand what they are and how to change them.
Thank you and best regards
Phil Parkin
'Power mode' set to 'Best performance' and
'When plugged in, put my device to sleep after' set to 'Never'.
Despite this, the PC goes to sleep after a few minutes of being idle, which in turn kills RDP sessions which I do not want to happen.
There must be other settings somewhere which are overriding the 'Never' setting. Please help me understand what they are and how to change them.
Thank you and best regards
Phil Parkin
computer slow
hello my computer is 7 yrs old barely anything on it but slow what can i do to improve overall maintenance
No me funciona bien el Brillo, y tampoco me detecta los auriculares
No me anda elbrillo, no lo puedo manejar a mi antojo, y los auruculares no los detecta.
mise a jour
pourquoi je n arrive pas a installer completement la mise a jour windows 10 22h2 ? merci d avance M GIORSETTi
Can not delete most recent Restore Point or any other point
Hi,
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
I've tried many methods to delete most recent Restore Point or any other point even via the cmd prompt *deleting shadow copies) and it doesn't work. I installed some software my IOBIT Uninstaller cannot find to uninstall and it is not in the list of Add/Remove programs but they are 368MB in size and installed in my pc and cannot llocate them. Only going back to my previous restore point would work and I try to do it but it does not work. PC boots up saying system restore failed most likely dur to active anti-virus software but I have my Bitdefender dissabled permanently when I did the restore point procedure.
Any ideas? Could Bootspeed interfere with restoring the pc at an earlier restore point?
Thanks,
Dimitris
profile
i have windows 7 windows will log me on as temp profile unsted of administrater i googled this question and is sent me to your site says to download your registery cleaner run it and myproblem is solved but it didnt work please help
Accessing Permission to view photos
Some photos in my Photos App do not show thumbnails and state You do not have permission to view this file. How can I correct this issue. I do not know where to go to activate permission for viewing these photos.
play game without lag
i am playing the game is heavy than 60gb so i have a question
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
how to keep yuor pc faster,play game at 60fps
note:pc processsor:pentinum g3250
ram 4gb
Location
Since installing BoostSpeed and using the various tools, my computer Location function is no longer operable. In Settings, all options to switch location settings on are greyed out. I have follewed various YouTube suggestions to no avail. One Registry key the videos refer to I don't seem to have anymore, although I can't find it deleted in BoostSpeed bin. The key is:- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lfsvc\TriggerInfo
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
Any ideas? Not sure how much info you need from me or how much you already know. I need to resolve this issue. I do not want to do a clean install of Windows 10 as I will lose all my Apps etc. I am not a computer expert by any means, so please keep any suggestions simple for me to understand. Thanks.
windowsupdateの更新履歴が消えた
Boostspeed13のマイダッシュボードのシステムスキャンを実行した後、windowsupdateの今までの更新履歴が消えてしまいました。更新履歴が消えない設定を教えてください。
Windows11 22h2 osビルド 22621.819
Boostspeed 13.0.0.1
Windows11 22h2 osビルド 22621.819
Boostspeed 13.0.0.1
Заблокирован доступ к системному файлу
Не возможно изменить или удалить системный файл (C:\Boot\BCD), т. к. он занят и ократ в SESTEM
Perdi minha chave do Windows Original OEM apos executar o BootSpeed13
O que eu devo fazer para recuperar minha chave do Windoss Original? Pois apos instalar e exceutar este programa, tive este prejuizo inacreditavel.
Windows Explorer Is SLOW To Search For Folders
Windows Explorer Is SLOW To Search For Folders when I try to SAVE any type of file. The Scroll Bar at left side keeps jumping up & down, then the cursor begins to spin & spin as if in a freeze mode. Finally, all of these ODD Actions STOP & CALM DOWN. Then it
FINALLY allows me to click & select the Folder I need to get into. This is STRANGE. Can you explain WHY this is happening ?? YES
-- I do use AUGLOGICS Boost Speed 13 (UPDATED) to do Maintenance & CleanUp on my Laptop (Windows 7), but still this problem does NOT want to go away. YES -- I did INDEXING Function several times on my Laptop, but still no improvement. Do You Have ANY
Suggestions for me ?? Other than to do a Complete Factory RESET of My Laptop ??
FINALLY allows me to click & select the Folder I need to get into. This is STRANGE. Can you explain WHY this is happening ?? YES
-- I do use AUGLOGICS Boost Speed 13 (UPDATED) to do Maintenance & CleanUp on my Laptop (Windows 7), but still this problem does NOT want to go away. YES -- I did INDEXING Function several times on my Laptop, but still no improvement. Do You Have ANY
Suggestions for me ?? Other than to do a Complete Factory RESET of My Laptop ??
System Scan
Every time I run a system scan Boostspeed highlights the TCP/IP internet setting as needing attention. It then says it's resolved it. This occurs on every system scan run.
Any thoughts?
Any thoughts?
Background processes
I have the idea that background processes lower the framerates of my flight simulator, leading to stutters. When I examine the resource monitor, I see that about 200 background processes are running, even when totally none program is active. I cannot image why all those processes are neccessary. All those processes have names that doesn't give my any insight in what all those processes are doing. How can I find out which processes I can stop and which are mandatory?
Re-enable the Windows key on the keyboard
How do I Re-enable the Windows key on the keyboard. Something in Boostspeed disabled it.
Проблема
Здравствуйте почему Ауслоджик удаляет установленные обновления и препятствует их загрузке.Можно ли востоновить установленные обновления.
USB Logitech G213 Keyboard and G203 Mouse will not connect and operate.
Windows 11 will not recognize and allow either of these two really nice, brand new, input devices to operate in the windows environment.
I've used the Auslogics Driver Updated version 2 to make sure all the drivers were current and operational.
I'm running a MSI Rader GE76 12UE 871, with 64 GB Ram, and 3 TB of SSD storage. I've also verified with the MSI Support site that I'm running the latest version of BIOS.
Everything else seems to run just fine.
I can utilize any BT keyboard and mouse without issue.
When I boot the system into BIOS setup, the USB G203 mouse works just fine and allow me to make any selections that I might need. I've also taken both devices to my wife's laptop and they both work just fine there as well so I'm fairly positive there is some setting in the windows environment that has become corrupted and will not allow me to uise these nice devices.
I've used the Auslogics Driver Updated version 2 to make sure all the drivers were current and operational.
I'm running a MSI Rader GE76 12UE 871, with 64 GB Ram, and 3 TB of SSD storage. I've also verified with the MSI Support site that I'm running the latest version of BIOS.
Everything else seems to run just fine.
I can utilize any BT keyboard and mouse without issue.
When I boot the system into BIOS setup, the USB G203 mouse works just fine and allow me to make any selections that I might need. I've also taken both devices to my wife's laptop and they both work just fine there as well so I'm fairly positive there is some setting in the windows environment that has become corrupted and will not allow me to uise these nice devices.
cleanup of the registry
how to eliminate all references to the installation of a software from the Windows registry, in order to completely clean the installation files still present in the system and which are not eliminated by uninstalling that program
Add Folder (PIN) to Quick Access Not Working
I log into my laptop as local user ACS_LLC but when logged in it shows my email as mikewruth@gmail.com
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
System Events Notification Service
I have been trying to fix an issue for 60 days now and I decided to purchase your software. At this time, I hope that I have purchased the correct program? My issue occurred when I decided to switch from Panda Dome anti-virus to Bitdefender (BD). During the installation, I got a prompt that stated for me to remove my Malwarebytes AV, which I did. However, BD gave me no notice about my Hitman Pro.Alert AV program. After I had installed BD, a few day later, (SEP 24), I ran a Hitman Pro.Alert scan. It found one item, a suspicous ".dll file" and asked if I wanted to quarantine or delete? To keep this short, I used the quarantine option, because if there were any issues, I could just remove the quarantine. Well, yes, there were immediate problems. My tool bar display changed and I found out quickly that I could not move pictures or files from (for example) Downloads to My Documents. It also affected my ability to use my graphic art software, such as COREL. There's a lot more to this and I am very disappointed with Sophos, who bought the rights to Hitman Pro and Hitman Pro.Alert. Bottom line, I was not able to restore this "quarantined .dll file."
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
Direct X won't install or go away
HI there, would love a solution for this window that keeps popping up and won't stop. I've clicked "Install" , "Cancel", have closed it and it just keep coming back non stop. please help!!!
IRQL NOT LESS OR EQUAL - PANTALLA AZUL AL PRENDER LAPTOP
BUENOS DIAS
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
RAM and CPU
Hello, my computer is not that powerful, ideapad 3i, sometimes the memory and processing gets saturated, I would like to know if in boostspeed there is a function to press a button and optimize the RAM memory of windows. Thank you
sCAN wINDOWS INSTALLATION ON OTHER dISK
I have lost the central vision in both my eyes and am in South America for 3 months visiting my kids.
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
Velocizzare apertura file cartelle e foto
Buongiorno,
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?
Edge permissions
I use Windows 11 and Edge is my default browser. I love Microsoft Edge but can't understand why every time I start my computer, Windows asks me twice to give permission for it to use Edge, and then later when I go to use Edge it asks me again.
Given that Microsoft has created both the software that runs my computer and also Microsoft Edge, I speculate it should be possible to avoid such an unecessary procedure. Will you please tell me how to do this? Thanks.
Given that Microsoft has created both the software that runs my computer and also Microsoft Edge, I speculate it should be possible to avoid such an unecessary procedure. Will you please tell me how to do this? Thanks.
WinSXS via Auslogics Windows Slimmer 4.0.0.6
Hello,
I wanted to know why, when I clean the WinSXS folder via Auslogics Windows Slimmer, I always have "1 ignored item" at the end, for a size exceeding 1.3 GB. In addition, I cannot see the item concerned. This problem occurs both with the PRO version of Windows Slimmer 4.0.0.6 and with the free version.
I also wanted to know how to delete it. I have already tried via CMD DISM, and DISM++, but CMD remains stuck at 70%, and DISM++ only deletes 200 MB.
Thanks in advance for your answer.
I wanted to know why, when I clean the WinSXS folder via Auslogics Windows Slimmer, I always have "1 ignored item" at the end, for a size exceeding 1.3 GB. In addition, I cannot see the item concerned. This problem occurs both with the PRO version of Windows Slimmer 4.0.0.6 and with the free version.
I also wanted to know how to delete it. I have already tried via CMD DISM, and DISM++, but CMD remains stuck at 70%, and DISM++ only deletes 200 MB.
Thanks in advance for your answer.
Delete all script typed into google search.
When I type something into incognito window,how do remove it so it can never appear again?