WDF_Violation every time I shut down W10-pro
every time I shut down W10-pro, the system after ~7 seconds I click on the shutdown button and W10 starts the procedure it shows the blue screen with WDF_Violation error message. I have updated all the drivers, but the issue remains.
I have this problem since a certain W10 update (in fact when I reverted that update the problem desappeared).
Thanks a million, in advance for your reply!
Cheers,
Alex
удаление профиля печати принтера HP
программа - отличная, спасибо.
Единственное, что хотел отметить - после сканирования уничтожаются настроенные профили печати на принтере НР (или последние использованные параметры). Перед печатью пять их делать приходится
С уважением
Дмитрий
Indexing keep turning off
I noticed that my Auslogics BoostSpeed 11 keeps turning of my windows search indexing. How can i prevent that from happening.
regards
my computer does not connect to my bluetooth headphone
sistema
intel inside core i7.thoshiba satellite.scheda video amd radeon graphics
BSOD
boostspeed being blocked
Hi. I have recently downloaded malwarebytes and it wont allow anything through from auslogics and deletes the program then wont let me download boostspeed12 again. I have tried the ignore list, but still no good. any help please? ozzyos
restarting issue
hello, i've been having an issue with my computer restarting whenever it likes to. i'm not sure what's wrong. i've troubleshooted the ram by removing half and running, and then the other half but that didn't work. i do not have an over heating problem, nor dust build up on cpu.
уведомления
Здравствуйте Очень часто всплывает уведомление Обноружено высокое потребление ресурсов ЧТО это икак исправить? Зарание спасибо!
mise a jour de fonctionalité vers windows 10 version 20H2 bloque a 61%
Je veux desinstalle Conexant Smart Audio HD qui est supposé creer ce probleme.
Le désinstalleur de Boostspeed ne le troive pas.
POurriez vous me donner une suggestion?
Merci
Cordialement.
Ошибка драйвера
Ошибка драйвера устройства "Intel(R) Management Engine Interface" (вложение файл 1). Запуск этого устройства невозможен (код 10). Аналогичный статус этого устройства показывает Auslogics BoostSpeed 12.
Переустановка драйвера средствами Windows ситуацию не изменила.
Программа Auslogics Driver Updater определила, что все драйверы актуальны (вложение файл 2).
will this make my pc as fast as it was when i powered it up for the 1st time?
when i turn my pc on it takes like 30 sec to get to the windows screen where it use to take less than 3 seconds - will boost speed 12 pro resolve this issue?
my pc seems to lag and slow down while having multiple programs open and running at the same time where when it use to not do this. - will boost speed 12 pro resolve this issue?
internet speed seems extreamly lower than ususal - will boost speed 12 pro resolve this issue?
auslogics driver updater shows the same driver needing updating over and over like its not doing its job - why is this?? - does the program not work??? - will boost speed 12 pro resolve this issue?
ERROR CODE 80072EFE WHILE UPDATING
I AM HAVING TROUBLE IN UPDATING MY WINDOWS AND INSTALLING MANY APPLICATIONS.
ERROR CODE 80072EFE WHILE UPDATING
Language bar disappeared after using your software
after I installed and used BootSpeed, the language bar is gone.
In windows the option "use the desktop language bar when it's available" is on but even so the language bar is missing from the taskbar in Win 10.
I really need it back.
Windows Bitdefender
The Window Securitu System detects a Trojan in the Auslogics Speedbooster TaskManager.
Do I have a problem?
See attached file.
Sorry it is in French
printer problem
Can't open my Chinese typing software
I am a new user of your company's product - Auslogics BoostSpeed. After I use the boostSpeed, I can't open and use my Chinese typing software (倉頡 and 速成) in window 10.
I went to the Setup > Time and language > language, and still can't find a way to open it.
In BoostSpeed, I don't know how to undo it, so I can use my Chinese typing again.
Please help me solve this problem. Thanks.
Best regards.
Soni
Ma webcam ne fonctionne plus
Suite à des modifications de BootSpeed, la webcam de mon ASUS VivoBook Pro 17 N705FD ne fonctionne plus.
Elle a commencé à se mettre en 4/6, puis elle est maintenant déconnectée !
J'ai désinstallé le programme et coché l'option "restaurer les changements éffectués", mais cela n'a pas résolu le problème.
Best regards,
loupherv
¿Cuando voy a poder tener mi Windows11?
Проблема
USB Logitech G213 Keyboard and G203 Mouse will not connect and operate.
I've used the Auslogics Driver Updated version 2 to make sure all the drivers were current and operational.
I'm running a MSI Rader GE76 12UE 871, with 64 GB Ram, and 3 TB of SSD storage. I've also verified with the MSI Support site that I'm running the latest version of BIOS.
Everything else seems to run just fine.
I can utilize any BT keyboard and mouse without issue.
When I boot the system into BIOS setup, the USB G203 mouse works just fine and allow me to make any selections that I might need. I've also taken both devices to my wife's laptop and they both work just fine there as well so I'm fairly positive there is some setting in the windows environment that has become corrupted and will not allow me to uise these nice devices.
cleanup of the registry
Add Folder (PIN) to Quick Access Not Working
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
System Events Notification Service
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
Direct X won't install or go away
IRQL NOT LESS OR EQUAL - PANTALLA AZUL AL PRENDER LAPTOP
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
RAM and CPU
sCAN wINDOWS INSTALLATION ON OTHER dISK
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
Velocizzare apertura file cartelle e foto
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?
Edge permissions
Given that Microsoft has created both the software that runs my computer and also Microsoft Edge, I speculate it should be possible to avoid such an unecessary procedure. Will you please tell me how to do this? Thanks.
WinSXS via Auslogics Windows Slimmer 4.0.0.6
I wanted to know why, when I clean the WinSXS folder via Auslogics Windows Slimmer, I always have "1 ignored item" at the end, for a size exceeding 1.3 GB. In addition, I cannot see the item concerned. This problem occurs both with the PRO version of Windows Slimmer 4.0.0.6 and with the free version.
I also wanted to know how to delete it. I have already tried via CMD DISM, and DISM++, but CMD remains stuck at 70%, and DISM++ only deletes 200 MB.
Thanks in advance for your answer.