Most Viewed questions

перестала работать панель задач
произошло это так - включаю я пк, немного поиграл, буквально минут 15-20, и меня встретил синий экран, который не смерти, а обычный синий экран ошибки, где пишут перезагрузка, проблема с чем-то (ну вы поняли, да ведь?), после перезагрузки начались проблемы с жёсткими дисками, но я их решил, и после решения проблем с дисками перестала работать панель задач, только открываются ярлыки разных приложений, а вот системные не работают, например пуск, поиск, звук, календарь, да даже настройки не открываются! всё перепробывал! и powershell, ну команды в нём и т.д., всякие приложения.
помогите пожалуйста!

Greetings,

Please open "Screen Shot" of error.

Thank you for your help in this matter.

Long Time Auslogice Customer

V/r

J. Aguero

Sometimes my computer freezes and I have to wait awhile to type again. Is there a solution for this? This happens in Internet browsers and Microsoft Word.

Por favor quiero actualizar mi version a Pro

I have two WD 3.6Tb external USB3 drives for backups and storage. These are both deffo HDD! I have discovered that they are TRIM enabled ... BUT, you don't trim HD's, do you??? I have had had trouble with them in the past due to increasing slowness and defragmentation. Sometimes Defrag Ultimate just couldn't finish a HDD defrag or gave up and stood still, but didn't crash either! Defrag Ultimate treats them as HDD's, but I am wondering if actually SSD Trimming them and then HDD Defragging them might solve or reduce my problems. But, I don't want to try this if I am going to damage them. So how should I treat them generally and within Defrag Ultimate

Confused.

Simon F

After about 4 hours of just Windows running with no other programs, the Commit Charge memory fills to 100% and I have to restart the computer. I have the settings set to automatic that control teh Commit Charge memory and it doesn't seem to prevent the problem from occurring. Any other suggestions to correct this?

Здравствуйте!

Мой ноутбук иногда являет синий экран с сообщением driver power state failure. Ноутбук Hewlett Packard, ОС Виндовс 10.

Антивирус Касперский, ещё стоит Auslogics BoostSpeed 12.

Ноутбук куплен прошлой весной.

Скажите, пожалуйста, существуют ли способы решения этой проблемы?

С уважением, Иван.

На разных дисках установлена Windows 8.1 и Windows 10. Один раз я искал нужный файл, который был Windows 8.1. Для этого изменил занрузку в BIOS и запустил Windows 8.1. Искал файл. Вернулся на Windows10 у меня начались проблемы Windows 10. Потом много чистил и обновлял Windows 10 с помощью Auslogics. Удалось исправить, но вот с диском никак. Да и времени просто не хватает. Помогите с чего начать чтобы работать с диском

I am a long time professional and I am actually quite tech savvy. I use the computer very very clean (obsessive level) But my mouse started to lag recently. I have downloaded Auslogics Pro (thats how we met) Even though I liked the software, it didnt solve the problem.

My laptop is Dell Vostro with i7 and 8GB Ram. Fairly new one (less than 1 year) But even with a simple operation (like opening Skype) it starts to level up fan noise and mouse starts to flicker, lag from time to time.

I formated everything on my computer (because this was not the case until very recently) but even that didnt help.

What can be the reason?

I'm new to the softward. Running v12.

Auslogic is running in the background, I guess. (I didn't start any actions since my recent reboot.)

It's using between 25 and 40% of my CPU capacity. I DO NOT want that to happen. If something's running on its own, how do i schedule it to run during the night.

Why is it doing that? What's running? How can I keep it from starting a process on it's own.

(I know i can hit "End task" in Task Mgr, but I wanted to know how to prevent this in the future.)

Thank you,

SjK

Доброго времени суток!

Нужна помощь в снижении пинга в сети.
После прогона internet optimizer пинг по прежнему остается высоким на разных серверах (в районе 200-300ms)
Есть ли возможность сделать что либо еще?

I have problems Closing the lid does not work. I set it to sleep or shut down neither of them worked.When I tried to find a solutions
I entered a code to CMD and all my power plans resetted.The ones which auslogics set also gone the preset power plans.And when I set balanced again I have also have no slider on the battery icon to change it to left to battery save or right to better performance.

Now I have left with no power plans of auslogics and ultimate is gone too.Can I get them back or how ?
Can I get back my old battery icon slider when in balanced mode ?
Can I fix the closing the lid action and make laptop sleep when i close it ?

After boot. Windows ask for user. To choise of two with same name en than pin code.
Want to delete wrong choise

hard disk crash...reloaded win10 not from backup
reload drivers multiple time
computer works
no sound
hp pavillion/i7gen10/b&o sound/nvidia

как включить камеру

Установленная у меня лицензионная программа Auslogic BootSpeed 11 постоянно конфликтует с программой ESET Internet Security версии 12.2, а программа Dr.Web Curelt! просто удаляет Auslogic BootSpeed 11, как несущую угрозу компьютеру (вирусная угроза!). Прошу Вас разовбраться в этой проблеме. С уважением, Шишков Руслан Владимирович

i have updated the first driver in the list of drivers to be updated many times, why does it continue to on the list.
i update drivers 2 or 3 times a day but the list doesn't get any shorter,why.

Win 10 problem: one update won't go through at all, Microsoft Edge opens a white page (personally) that I can't close normally, repair fails because the new install stops in the middle and never finishes. When Edge doesn't work, Outlook doesn't work, neither explorer, right-click on files doesn't work. Sometimes Edge works, but soon stops. I've tried everything, I don't know what to do. I don't use Edge, but apparently it blocks everything else for me.

I am trying to update my Nvidia GeForce GTX 960 driver via Auslogics Driver Updater and it's taking a very long time to install. I began the process yesterday (29/03/24) at around 7pm and expected it to take a long time to back-up the old driver setting and then download the new driver. I've come back to my computer at 30/03/24 at 1pm and it is still installing.

Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?

I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.

Thank you

Перестал работать микрофон