Most Viewed questions

I would like to record audio from my turntable (Line level) to my Dell 5567 Laptop. The only Recording device that windows detects (listed in the "Recording" tab of the "Sound" dialogue box) is "Microphone" Obviously I don't want to use Microphone as the Recording device.
I would like to use the 3.5mm Jack Speaker/Headphone socket as the Recording input device, but although it is listed as a Playback device, it is not listed as a Recording device.

This is becomming annoying. I keep getting alerted that a new version of BoostSpeed is available. I've downloaded 12.0.0.2 and ran the installation which prompts that it is removing with re-start and then I have to manually install the latest download. After three successful runs with this I still end up with version 12.0.0.1 What gives?

USBと無線機をつないでます
マイク．．スピーカーのドライバー（オ－ディオ）サウンド
認識してくれません
とエラ－メッセージ．が出ます．

よい知恵を貸して下さい．

How do I use Boost speed 12 to get rid of this issue where Notebook opens at start up with

[.ShellClassInfo]
LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787

I have about a dozen 2.5" & 3.5" SATA HDs, no bigger than 4TB that I have been using for years without issue. They are used in conjunction with via a WAVLINK eternal docking station, holds 2 drives" to USB. Recently, one HDs, 3TB one, when I tried to use it, I got an error message, "invalid parameter", "drive is not accessible or corrupted" or something like that. So I used the DSK command in Window 11 and it showed up as a "healthy drive" but showed up as "RAW" (needed to be formatted basically of course) instead of NTFS as it should be. I took this situation to be a fluke but just now, with two 4TB drives in at the same time in the docking station, the same thing happened TO THEM BOTH. I had them connect to my laptop for several hours then suddenly got the "drive not accessible" error.  Same issue as before basically and back to RAW. Correct me if I'm wrong but does this very likely indicate that the docking station is creating this problem all of a sudden? It's either that or my laptop is sending something out to the drives that is causing this. Give me your opinion. My bottom question is, I'm assuming the MBR got corrupted or disappeared, of course there could be something else but it's been a very long time since I have messed with HDs on this level. Is there any way without having to send the drives out to have them professionally recovered, something I can do myself at home to re access the drives normally? Thanks in advance, Jim.

Greetings Aus Q,

Go ahead and ding me if this is perceived as more than one question.

Currently, I'm using my old laptop with Win 7 and BIOS date October 2009, with 2 GB memory stick added for a total of 4GB. Over a year ago, I bought a Dell Inspirion 15 3000 (3565). Within the warranty period, on the 1803 or 1809 Win 10 update, something happened. Sent back to Dell, and got motherboard replaced and something else. Other issue was my display. Dell said I broke the display and would not fix it.

Money was tight and I could not replace it and went back to my current laptop on Win 7. I spend too much time trying to keep my Win 7 laptop running at a decent clip with the quality Auslogics boot-speed program.

A) I was surprised when I checked Amazon, they have a great price on replacement displays. If I could get a new display, add an extra 4 GB mem stick to give me 8 GB RAM, and research a compatible( or suggestions from you) quality SSD to rplace my HDD for under $200, or buy new laptop with the necessary chit for my sole proprieter business in the $400-600 price range; what would you do?

B) With Win 7 losing support in a month, and all the Win 10 update problems, I was thinking about transitioning to a Linux distro similar to Windows. Make sense from a security issue position?

C) Is it worth looking for a higher end almost new/used laptop on Craigslist or other avenue?

D) Also, my AUS b-s license, can I transfer it to my Dell or to the new pc?.

Thank you,

Jim Copeland

Один и тот же ключ ЭЦП (Электронная цифровая подпись) на флеш-памяти с одного компьютера считывается и подписывает документы без ошибок, а со второго - нет, Выдает ошибку о невозможности использования или сертификат поврежден. Главное - до чистки компьютера программой Auslogics BoostSpeed 12 ключ без ошибок подписывал документы и со второго компьютера. Вопрос, что мог изменить или удалить Auslogics BoostSpeed 12 в компьютера, то перестал корректно работать ЭЦП (Электронная цифровая подпись).

Какую службу или какие настройки в Windows 10 надо изменить, чтобы Электронная цифровая подпись работала со второго компьютера и подписывала документы? Спасибо!!!

this is too mucj tab in software
Dashboard
Once clikc scanner
cleanup
optimize,protect and so on. huh i am officer i have not 01 hour to go thorugh each, please make menu and userinterface like AVG PC Tune Up, iolo system mechanic, Norton antivirus etc. its easy,
Please do some hard work,

Bonjour, je rencontre un ralentissement limitant l'usage de Google Drive. Les affichages sont très longs, les échanges de contenus encore plus...
Je l'ai réinstallé, sans succès.

Wann hören Sie endlich auf mit Ihrer Reklame zu Bombardieren .Es ist sehr Làstig !!!! mit gruss M.Monnier

I paid for this software before it went to version 11. Now that it updated to 11 I have to purchase it again?

BUEN DÍA. CÓMO ACTIVAR PRODUCTO DE WXCEL, WORD, POWER POINT?' SALE COMO PRODUCTO SIN ACTIVACION

Ok ..so Ill just tell my problem: I started getting unsuccessful access tries constantly for mm a year ,it wassnt like that before, and i dont know from where or why.. my Mobile? But some are from Firefox and i dont have it anywhere anymore Have you seen something like this before? I have a picture ..screenshot

You said: Im NOT doing it.. ..i think Automatic? From where ..my mobile But why?! How.. Wifi is off there "all the time"
You said:
Im NOT doing it.. ..i think Automatic? From where ..my mobile But why?! How.. Wifi is off there "all the time"

Thank you far any insight.. Regards, Mitja

как получить бесплатный код

I must use FortiClient VPN to work and communicate with one of my jobs, at Southern Cross University, (SCU). Until yesterday it worked fine.
I have just installed the lastest version in an attempt to resolve the non-connection issue.

Is there a setting in Auslogics BoostSpeed that might affect that VPN?
Any suggestions.

I run BoostSpeed and just accept whatever 'fixes' it suggests, the default or automatic, as I am not wise enough to adjust anything myself.

Could doing that have broken something or blocked the VPN?
I am nervous that Auslogics-Boostspeed is being over active in cleansing my system, of things that I actually need to maintain, like the Forticleint VPN. Firewall settings area mystery to me. I dont change them because I do not know what I am doing.

どうもPCのSSDをHDDと認識しているようで、スキャンすると毎回デフラグしてしまっている。これではSSDの寿命を縮めるのではないかと心配である。ちゃんとSSDと認識させるためにはどのようにすればよいのでしょうか？

как включить камеру

How can I restore my file after auslogic Boostspeed deleted the program file? Meantime, i cant open a program.

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.

I used your system yestrday for the first time attempting to release space on my PC.
however,what appears to have happened is that my programme has disappeared and access to all my Office files with it.
Can you undo what has happened as it is very inconvenient?

Kind regards,

Pete Davies